3209510 Phoenix Contact Terminal Blocks

Product Details

• Result of power-frequency withstand voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Result of tight fit on support
  Test passed
• Tight fit on carrier
  NS 35/7.5
• Nominal current IN
  24 A (at 2.5 mm²)
• Result of surge voltage test
  Test passed
• Acceleration
  30g
• Shock form
  Half-sine
• Static insulating material application in cold
  -60 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Nominal voltage UN
  800 V
• Result of flexion and pull-out test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock test result
  Test passed
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2018-05
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Height NS 35/7,5
  36.5 mm
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Setpoint
1 N
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
ASD level
6.12 (m/s2)2/Hz
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
48.6 mm
Maximum power dissipation for nominal condition
0.77 W
Surge voltage test setpoint
9.8 kV
Bending test turns
135
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Stripping length
8 mm ... 10 mm
Connection in acc. with standard
CSA
Result of thermal test
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Connection method
Push-in connection
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
Power frequency withstand voltage setpoint
2 kV
Requirements, voltage drop
≤ 3.2 mV
Conductor cross section solid max.
4 mm²
Conductor cross section flexible min.
0.14 mm²
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Short-time current
0.48 kA
Result of temperature-rise test
Test passed
Connection
1 level
Min. AWG conductor cross section, flexible
26
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test spectrum
Service life test category 2, bogie-mounted
Height NS 35/15
44 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ECLASS 7.0
27141120
UNSPSC 13.2
39121410
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Conductor cross section short circuit testing
4 mm²
Short circuit stability result
Test passed
Conductor cross section AWG max.
12
Conductor cross section flexible max.
2.5 mm²
Internal cylindrical gage
A3
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 10.0.1
27141120
ETIM 4.0
EC000897
ETIM 7.0
EC000897
UNSPSC 11
39121410
Proof of thermal characteristics (needle flame) effective duration
30 s
Width
5.2 mm
Height
35.3 mm
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 2.0
EC000897
ETIM 6.0
EC000897
UNSPSC 21.0
39121410
ECLASS 4.1
27141100
ECLASS 9.0
27141120
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
Number of levels
1
Color
gray
Degree of pollution
3
Number of connections
2
Insulating material
PA
Insulating material group
I
Potentials
1
Area of application
Railway industry
Maximum load current
28 A (with 4 mm² conductor cross section, rigid)
Back of the hand protection
guaranteed
Nominal cross section
2.5 mm²
Overvoltage category
III
Open side panel
Yes
Rated surge voltage
8 kV
Shock duration
18 ms
Number of positions
1
Flammability rating according to UL 94
V0