3209549 Phoenix Contact Terminal Blocks

Product Details

• Maximum load current
  28 A (with 4 mm² conductor cross section, rigid)
• Setpoint
  1 N
• Result of temperature-rise test
  Test passed
• Tensile test result
  Test passed
• ECLASS 5.1
  27141100
• Number of levels
  1
• Color
  gray
• Overvoltage category
  III
• Maximum power dissipation for nominal condition
  0.77 W
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test turns
  135
• Tight fit on carrier
  NS 35
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Acceleration
  30g
• Shock form
  Half-sine
• Static insulating material application in cold
  -60 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
Height
35.2 mm
Connection in acc. with standard
CSA
Conductor cross section solid min.
0.34 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
Short-time current
0.48 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
36.5 mm
Connection method
Push-in connection
Conductor cross section AWG max.
12
Max. AWG conductor cross section, flexible
14
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
44 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
Result of thermal test
Test passed
End cover width
2.2 mm
Stripping length
8 mm ... 10 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
ECLASS 10.0.1
27141120
Conductor cross section short circuit testing
4 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
5 h
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
5.2 mm
Length
60.5 mm
Connection
1 level
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ECLASS 7.0
27141120
Short circuit stability result
Test passed
ASD level
6.12 (m/s2)2/Hz
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Number of connections
3
Insulating material
PA
Degree of pollution
3
Nominal voltage UN
800 V
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 9.0
27141120
ETIM 2.0
EC000897
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Area of application
Railway industry
Insulating material group
I
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
UNSPSC 12.01
39121410
UNSPSC 11
39121410
ETIM 4.0
EC000897
ETIM 6.0
EC000897
UNSPSC 20.0
39121410
UNSPSC 18.0
39121410
Requirement temperature-rise test
Increase in temperature ≤ 45 K
ETIM 7.0
EC000897
Potentials
1
Flammability rating according to UL 94
V0
Nominal current IN
24 A (with 2.5 mm² conductor connection cross section)
Finger protection
guaranteed
Rated surge voltage
8 kV
Result of surge voltage test
Test passed
Nominal cross section
2.5 mm²
Bending test rotation speed
10 rpm
ECLASS 4.0
27141100
ECLASS 5.0
27141100
UNSPSC 13.2
39121410
UNSPSC 7.0901
39121410
Power frequency withstand voltage setpoint
2 kV
Result of voltage-drop test
Test passed
Open side panel
Yes