3209604 Phoenix Contact Terminal Blocks

Product Details

• Tight fit on carrier
  NS 35
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Conductor cross section short circuit testing
  4 mm²
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  0.77 W (the value is multiplied when connecting multiple levels)
• Open side panel
  Yes
• Surge voltage test setpoint
  7.3 kV
• Bending test rotation speed
  10 rpm
• Tractive force setpoint
  60 N
• Result of temperature-rise test
  Test passed
• Result of thermal test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock test result
  Test passed
• Shock duration
  18 ms
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Short-time current
  0.48 kA
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test duration per axis
  5 h
Shock form
Half-sine
Conductor cross section flexible max.
4 mm²
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Internal cylindrical gage
A3
ECLASS 4.0
27141100
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
UNSPSC 11
39121410
Color
gray
Rated surge voltage
6 kV
Connection in acc. with standard
CSA
Nominal voltage UN
500 V
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Conductor cross section tensile test
4 mm²
Bending test turns
135
Setpoint
1 N
ECLASS 10.0.1
27141120
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Requirements, voltage drop
≤ 3.2 mV
Number of connections
4
Insulating material group
I
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 3.0
EC000897
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
Nominal cross section
2.5 mm²
Overvoltage category
III
Nominal current IN
22 A
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Conductor cross section AWG min.
26
UNSPSC 12.01
39121410
Number of levels
2
Insulating material
PA
Maximum load current
24 A (with 4 mm² conductor cross section, rigid)
Finger protection
guaranteed
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ECLASS 4.1
27141100
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
ECLASS 5.1
27141100
ETIM 2.0
EC000897
ETIM 7.0
EC000897
UNSPSC 21.0
39121410
UNSPSC 18.0
39121410
Connection method
Push-in connection
Conductor cross section AWG max.
12
Conductor cross section flexible min.
0.14 mm²
Stripping length
8 mm ... 10 mm
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
55 mm
UNSPSC 20.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
5.2 mm
End cover width
2.2 mm
Result of voltage-drop test
Test passed
Result of aging test
Test passed
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Length
78 mm
Height NS 35/15
62.5 mm
Conductor cross section solid max.
4 mm²