3210185 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Degree of pollution
  3
• Maximum power dissipation for nominal condition
  0.77 W
• Back of the hand protection
  guaranteed
• Finger protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Result of thermal test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Acceleration
  30g
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2018-05
• Shock duration
  18 ms
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Width
  5.2 mm
• Height NS 35/7,5
  36.5 mm
• Connection
  1 level
• Min. AWG conductor cross section, flexible
  26
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.34 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
ECLASS 11.0
27141126
ECLASS 6.0
27141100
ECLASS 5.1
27141100
ETIM 4.0
EC000902
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Number of levels
1
Rated surge voltage
6 kV
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Setpoint
1 N
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Height
35.3 mm
Connection in acc. with standard
CSA
Conductor cross section AWG max.
12
Internal cylindrical gage
A3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 2.0
EC000897
ETIM 6.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
Note
Current and voltage are determined by the plug used.
Number of connections
2
Insulating material
PA
Insulating material group
I
Nominal current IN
20 A
Result of surge voltage test
Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Short-time current
0.3 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Connection method
Push-in connection
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ECLASS 9.0
27141126
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
Color
gray
Overvoltage category
III
Nominal voltage UN
400 V
Open side panel
Yes
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Result of aging test
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
62 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ETIM 3.0
EC000897
UNSPSC 11
39121410
Nominal cross section
2.5 mm²
Flammability rating according to UL 94
V0
Maximum load current
20 A (with 4 mm² conductor cross section, rigid)
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
End cover width
2.2 mm
Height NS 35/15
44 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
ECLASS 10.0.1
27141126
ECLASS 7.0
27141126
ETIM 7.0
EC000902
UNSPSC 13.2
39121410