3210198 Phoenix Contact Terminal Blocks

Product Details

• ECLASS 4.0
  27141100
• ETIM 4.0
  EC000902
• UNSPSC 11
  39121410
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.Current and voltage are determined by the plug used.
• Number of levels
  1
• Number of connections
  3
• Potentials
  1
• Nominal cross section
  2.5 mm²
• Color
  gray
• Insulating material
  PA
• Flammability rating according to UL 94
  V0
• Rated surge voltage
  6 kV
• Overvoltage category
  III
• Insulating material group
  I
• Maximum power dissipation for nominal condition
  0.77 W
• Degree of pollution
  3
• Maximum load current
  20 A (with 4 mm² conductor cross section, rigid)
• Nominal current IN
  20 A
• Nominal voltage UN
  400 V
• Open side panel
  Yes
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of flexion and pull-out test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Tensile test result
Test passed
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Result of temperature-rise test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short circuit stability result
Test passed
Setpoint
1 N
Conductor cross section short circuit testing
2.5 mm²
Short-time current
0.3 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Oscillation, broadband noise test result
Test passed
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ASD level
6.12 (m/s2)2/Hz
Test duration per axis
5 h
Acceleration
30g
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Shock form
Half-sine
Shock test result
Test passed
Number of shocks per direction
3
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
5.2 mm
Height NS 35/15
44 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section AWG min.
26
Conductor cross section flexible min.
0.14 mm²
Max. AWG conductor cross section, flexible
14
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
UNSPSC 21.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
36.5 mm
Connection method
Push-in connection
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
End cover width
2.2 mm
Stripping length
8 mm ... 10 mm
Min. AWG conductor cross section, flexible
26
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 9.0
27141126
ETIM 7.0
EC000902
UNSPSC 12.01
39121410
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
74 mm
Connection in acc. with standard
CSA
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141126
ECLASS 11.0
27141126
ETIM 2.0
EC000897
ETIM 3.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection
1 level
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A3
ECLASS 5.1
27141100
ECLASS 7.0
27141126
ETIM 6.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410