3210583 Phoenix Contact Terminal Blocks

Product Details

• UNSPSC 21.0
  39121410
• ECLASS 9.0
  27141120
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Nominal cross section
  2.5 mm²
• Overvoltage category
  III
• Area of application
  Railway industry
• Surge voltage test setpoint
  7.3 kV
• Flammability rating according to UL 94
  V0
• Finger protection
  guaranteed
• Number of levels
  2
• Color
  gray
• Degree of pollution
  3
• Result of surge voltage test
  Test passed
• Number of connections
  4
• Rated surge voltage
  6 kV
• Nominal voltage UN
  500 V
• Insulating material
  PA
• Maximum power dissipation for nominal condition
  1.54 W (the value is multiplied when connecting multiple levels)
• Insulating material group
  I
• Open side panel
  Yes
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Connection in acc. with standard
CSA
Back of the hand protection
guaranteed
Tractive force setpoint
60 N
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
55 mm
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
26
Connection method
Push-in connection
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Setpoint
1 N
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
4 mm²
ASD level
6.12 (m/s2)2/Hz
Nominal current IN
22 A (with 2.5 mm² conductor connection cross section)
Power frequency withstand voltage setpoint
1.89 kV
Conductor cross section tensile test
4 mm²
Short-time current
0.48 kA
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
ECLASS 4.0
27141100
ECLASS 6.0
27141100
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Requirements, voltage drop
≤ 3.2 mV
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Height
45.8 mm
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
ECLASS 11.0
27141120
ETIM 2.0
EC000897
Maximum load current
26 A (with 4 mm² conductor cross section, rigid)
Result of flexion and pull-out test
Test passed
Bending test turns
135
Result of voltage-drop test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
End cover width
2.2 mm
Height NS 35/7,5
47.5 mm
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Internal cylindrical gage
A4
ECLASS 5.1
27141100
UNSPSC 18.0
39121410
Result of aging test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
30g
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section solid min.
0.14 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
ECLASS 4.1
27141100
UNSPSC 6.01
30211811
ETIM 6.0
EC000897
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Width
5.2 mm
Conductor cross section flexible min.
0.14 mm²
Stripping length
8 mm ... 10 mm
ECLASS 7.0
27141120
ETIM 4.0
EC000897
Test directions
X-, Y- and Z-axis (pos. and neg.)
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Length
68 mm