3210211 Phoenix Contact Terminal Blocks

Product Details

• Conductor cross section tensile test
  4 mm²
• Flammability rating according to UL 94
  V0
• Test spectrum
  Service life test category 2, bogie-mounted
• Result of voltage-drop test
  Test passed
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock duration
  18 ms
• Number of levels
  2
• Nominal current IN
  22 A
• ECLASS 9.0
  27141120
• UNSPSC 7.0901
  39121410
• Result of aging test
  Test passed
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Relative insulation material temperature index (Elec.; UL 746 B)
  130 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Height NS 35/15
  62.5 mm
• Conductor cross section AWG max.
  12
• Conductor cross section AWG min.
  26
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.14 mm²
• ECLASS 11.0
  27141120
ETIM 2.0
EC000897
Shock test result
Test passed
Length
78 mm
Conductor cross section flexible min.
0.14 mm²
Internal cylindrical gage
A3
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Stripping length
8 mm ... 10 mm
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Conductor cross section flexible max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
ECLASS 10.0.1
27141120
ECLASS 4.1
27141100
ECLASS 5.0
27141100
Acceleration
30g
Height NS 35/7,5
55 mm
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
ECLASS 4.0
27141100
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Conductor cross section solid max.
4 mm²
Surge voltage test setpoint
7.3 kV
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Short circuit stability result
Test passed
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Shock form
Half-sine
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Bending test rotation speed
10 rpm
Width
5.2 mm
UNSPSC 21.0
39121410
UNSPSC 11
39121410
Number of connections
4
Insulating material
PA
Degree of pollution
3
Maximum load current
26 A (with 4 mm² conductor cross section, rigid)
Bending test turns
135
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Ageing test for screwless modular terminal block temperature cycles
192
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Nominal cross section
2.5 mm²
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Open side panel
Yes
Setpoint
1 N
Short-time current
0.48 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Connection method
Push-in connection
ECLASS 7.0
27141120
ETIM 3.0
EC000897
UNSPSC 13.2
39121410
Overvoltage category
III
Nominal voltage UN
500 V
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Tractive force setpoint
60 N
Color
gray
Conductor cross section short circuit testing
4 mm²
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
ETIM 7.0
EC000897
ETIM 6.0
EC000897
UNSPSC 20.0
39121410
Rated surge voltage
6 kV
Connection in acc. with standard
CSA
Requirements, voltage drop
≤ 6,4 mV
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
Insulating material group
I
Tight fit on carrier
NS 35
Result of thermal test
Test passed
ECLASS 5.1
27141100
ETIM 4.0
EC000897
UNSPSC 19.0
39121410
UNSPSC 18.0
39121410