3212120 Phoenix Contact Terminal Blocks

Product Details

• Result of flexion and pull-out test
  Test passed
• Short-time current
  1.92 kA
• ASD level
  1.857 (m/s2)2/Hz
• Acceleration
  5g
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock form
  Half-sine
• Static insulating material application in cold
  -60 °C
• Result of voltage-drop test
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
• Shock duration
  30 ms
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Width
  10.2 mm
• Connection method
  Push-in connection
• Short circuit stability result
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
Result of tight fit on support
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Result of aging test
Test passed
Test duration per axis
5 h
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
50.5 mm
Conductor cross section solid min.
1 mm²
Conductor cross section flexible max.
16 mm²
Surface flammability NFPA 130 (ASTM E 162)
passed
Height
49.5 mm
Height NS 35/15
58 mm
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Permissible humidity (storage/transport)
30 % ... 70 %
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection in acc. with standard
CSA
Conductor cross section AWG min.
20
Max. AWG conductor cross section, flexible
8
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Connection
1 level
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
ECLASS 4.1
27141100
Conductor cross section solid max.
16 mm²
Conductor cross section AWG max.
6
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
1.5 mm²
Connection cross sections directly pluggable
1 mm² 16 mm²
ECLASS 5.1
27141100
Min. AWG conductor cross section, flexible
20
Internal cylindrical gage
A6
ECLASS 6.0
27141100
Length
67.7 mm
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test spectrum
Service life test category 1, class B, body mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Stripping length
18 mm
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
Overvoltage category
III
Nominal voltage UN
1000 V
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of thermal test
Test passed
Conductor cross section flexible, with ferrule with plastic sleeve min.
2.5 mm²
Tight fit on carrier
NS 35
Result of temperature-rise test
Test passed
Insulating material
PA
Rated surge voltage
8 kV
Insulating material group
I
Back of the hand protection
guaranteed
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Degree of pollution
3
Nominal current IN
57 A
Open side panel
Yes
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test rotation speed
10 rpm
Setpoint
5 N
Conductor cross section short circuit testing
16 mm²
UNSPSC 20.0
39121410
Nominal cross section
10 mm²
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.82 W
Tensile test result
Test passed
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
4 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
Potentials
1
Area of application
Railway industry
Maximum load current
70 A (with a 16 mm² conductor cross section, rigid)
Power frequency withstand voltage setpoint
2.2 kV
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
Number of connections
2
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 4.0
27141100
ETIM 2.0
EC000897
Number of levels
1
Color
gray
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock test result
Test passed
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ECLASS 7.0
27141120
ETIM 4.0
EC000897
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
ETIM 3.0
EC000897