3212138 Phoenix Contact Terminal Blocks

Product Details

• Connection
  1 level
• Conductor cross section AWG min.
  20
• Number of connections
  2
• Flammability rating according to UL 94
  V0
• Degree of pollution
  3
• Nominal current IN
  76 A
• Result of surge voltage test
  Test passed
• Result of tight fit on support
  Test passed
• Setpoint
  5 N
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Result of aging test
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
• Shock form
  Half-sine
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Max. AWG conductor cross section, flexible
  6
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• Number of shocks per direction
  3
• Color
  gray
• Rated surge voltage
  8 kV
Maximum power dissipation for nominal condition
2.43 W
Finger protection
guaranteed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Short circuit stability result
Test passed
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Shock test result
Test passed
Test duration per axis
5 h
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
12.2 mm
Height NS 35/15
60.1 mm
Stripping length
18 mm
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule with plastic sleeve max.
16 mm²
Internal cylindrical gage
A7
ECLASS 11.0
27141120
Back of the hand protection
guaranteed
Nominal voltage UN
1000 V
Number of levels
1
Insulating material
PA
Insulating material group
I
Result of power-frequency withstand voltage test
Test passed
Result of voltage-drop test
Test passed
Short-time current
3 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
End cover width
2.2 mm
Height NS 35/7,5
52.6 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible, with ferrule with plastic sleeve min.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
Conductor cross section solid min.
2.5 mm²
Nominal cross section
16 mm²
Area of application
Railway industry
Open side panel
Yes
Power frequency withstand voltage setpoint
2.2 kV
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Conductor cross section flexible max.
25 mm²
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Length
75.4 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
2.5 mm²
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of temperature-rise test
Test passed
Connection method
Push-in connection
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
1.5 mm²
ECLASS 6.0
27141100
ECLASS 9.0
27141120
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Overvoltage category
III
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section AWG max.
4
Conductor cross section flexible, with ferrule without plastic sleeve max.
16 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141100
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
Conductor cross section short circuit testing
25 mm²
Conductor cross section flexible min.
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.1
27141100
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Tensile test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Conductor cross section solid max.
25 mm²
Connection cross sections directly pluggable
2.5 mm² 25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 2.0
EC000897
ETIM 6.0
EC000897
UNSPSC 21.0
39121410
UNSPSC 19.0
39121410
Potentials
1
Maximum load current
85 A (with 25 mm² conductor cross section, rigid)
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
UNSPSC 6.01
30211811
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3