3212170 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Insulating material
  PA
• Overvoltage category
  III
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Power frequency withstand voltage setpoint
  1.89 kV
• Setpoint
  5 N
• Result of temperature-rise test
  Test passed
• Short-time current
  1.25 kA
• Test spectrum
  Service life test category 2, bogie-mounted
• Acceleration
  30g
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Length
  100.8 mm
• Connection in acc. with standard
  CSA
• Connection method
  Push-in connection
• Conductor cross section AWG max.
  8
• ECLASS 10.0.1
  27141126
• ECLASS 5.1
  27141100
• Nominal cross section
  6 mm²
Degree of pollution
3
Nominal current IN
30 A
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
8.2 mm
Height NS 35/7,5
49.6 mm
Stripping length
12 mm
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible max.
6 mm²
Max. AWG conductor cross section, flexible
10
Connection cross sections directly pluggable
1 mm² 10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 9.0
27141126
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Number of levels
1
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.31 W
Finger protection
guaranteed
Tight fit on carrier
NS 35
Tensile test result
Test passed
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
5 h
Shock form
Half-sine
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Connection
1 level
Conductor cross section solid max.
10 mm²
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ECLASS 5.0
27141100
UNSPSC 7.0901
39121410
Number of connections
2
Rated surge voltage
6 kV
Maximum load current
30 A (with 10 mm² conductor cross section)
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Conductor cross section short circuit testing
4 mm²
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Shock duration
18 ms
ECLASS 11.0
27141126
ECLASS 4.0
27141100
ECLASS 7.0
27141126
ETIM 4.0
EC000902
ETIM 6.0
EC000902
UNSPSC 18.0
39121410
Color
gray
Insulating material group
I
Nominal voltage UN
500 V
Open side panel
Yes
Result of tight fit on support
Test passed
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
57.1 mm
Conductor cross section solid min.
1 mm²
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Internal cylindrical gage
A5
UNSPSC 21.0
39121410
Ambient temperature (assembly)
-5 °C ... 70 °C
UNSPSC 12.01
39121410
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 3.0
EC000902
UNSPSC 19.0
39121410
Permissible humidity (storage/transport)
30 % ... 70 %
ETIM 7.0
EC000902
ECLASS 4.1
27141100
ETIM 2.0
EC000902
UNSPSC 11
39121410