3214589 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Overvoltage category
  III
• Nominal current IN
  17.5 A
• Open side panel
  Yes
• Result of surge voltage test
  Test passed
• Bending test turns
  135
• Conductor cross section short circuit testing
  1.5 mm²
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock test result
  Test passed
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Static insulating material application in cold
  -60 °C
• Width
  3.5 mm
• Height
  37 mm
• Connection method
  Push-in connection
• Conductor cross section AWG max.
  14
• Max. AWG conductor cross section, flexible
  14
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• ECLASS 11.0
  27141120
• ECLASS 5.1
  27141100
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
Number of connections
3
Flammability rating according to UL 94
V0
Nominal voltage UN
500 V
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Tight fit on carrier
NS 35
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
ASD level
1.857 (m/s2)2/Hz
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Nominal cross section
1.5 mm²
Rated surge voltage
6 kV
Degree of pollution
3
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Setpoint
1 N
Short-time current
0.18 kA
Test spectrum
Service life test category 1, class B, body mounted
Test duration per axis
5 h
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
50.7 mm
Height NS 35/15
46 mm
Insulating material
PA
Maximum power dissipation for nominal condition
0.56 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of temperature-rise test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Oscillation, broadband noise test result
Test passed
Acceleration
5g
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section solid min.
0.25 mm²
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Number of levels
1
Potentials
1
Insulating material group
I
Maximum load current
17.5 A
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short circuit stability result
Test passed
Result of aging test
Test passed
Shock form
Half-sine
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
30 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection
1 level
Connection in acc. with standard
CSA
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
1 mm²
Internal cylindrical gage
A1 / B1
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141100
ECLASS 6.0
27141100
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Height NS 35/7,5
38.5 mm
Stripping length
8 mm ... 10 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Connection cross sections directly pluggable
0.25 mm² 1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
ECLASS 10.0.1
27141120
ECLASS 4.1
27141100
ETIM 6.0
EC000897
ETIM 4.0
EC000897
UNSPSC 11
39121410