3273022 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Overvoltage category
  III
• Maximum load current
  32 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test rotation speed
  10 rpm
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Color
  gray
• Maximum power dissipation for nominal condition
  0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Back of the hand protection
  guaranteed
• Result of surge voltage test
  Test passed
• Result of power-frequency withstand voltage test
  Test passed
• Result of voltage-drop test
  Test passed
• Result of tight fit on support
  Test passed
• Short-time current
  0.48 kA
• Oscillation, broadband noise test result
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Shock form
  Half-sine
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Length
58.1 mm
Connection in acc. with standard
IEC 60947-7-1
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible min.
0.14 mm²
Insulating material
PA
Degree of pollution
3
Insulating material group
I
Nominal voltage UN
690 V
Open side panel
No
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock test result
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
32.4 mm
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Internal cylindrical gage
A3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141121
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Nominal cross section
2.5 mm²
Flammability rating according to UL 94
V0
Maximum total current
48 A
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
28.6 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 11
39121410
Number of levels
1
Number of connections
12
Rated surge voltage
8 kV
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section solid min.
0.34 mm²
Max. AWG conductor cross section, flexible
14
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.1
27141120
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Test duration per axis
5 h
Test directions
X-, Y- and Z-axis (pos. and neg.)
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Height NS 15
30.4 mm
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 4.1
27141121
ETIM 7.0
EC000897
UNSPSC 20.0
39121410
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Nominal current IN
24 A
Bending test turns
135
Setpoint
1 N
Conductor cross section short circuit testing
4 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Short circuit stability result
Test passed
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ECLASS 5.0
27141120
Tensile test result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Conductor cross section AWG min.
26
ECLASS 10.0.1
27141120
Tight fit on carrier
NS 35
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²