3273228 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  13
• Insulating material
  PA
• Maximum load current
  57 A (with 10 mm² conductor cross section)
• Overvoltage category
  III
• Result of power-frequency withstand voltage test
  Test passed
• Back of the hand protection
  guaranteed
• Result of tight fit on support
  Test passed
• Bending test turns
  135
• Short circuit stability result
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Ageing test for screwless modular terminal block temperature cycles
  192
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock test result
  Test passed
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Width
  41 mm
• Connection method
  Push-in connection
• Conductor cross section AWG min.
  20
• Conductor cross section AWG max.
  8
Nominal cross section
2.5 mm²
Rated surge voltage
8 kV
Nominal current IN
41 A (with 6 mm² conductor cross section)
Open side panel
No
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of flexion and pull-out test
Test passed
Result of temperature-rise test
Test passed
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
10 mm²
Short-time current
1.2 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Number of shocks per direction
3
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Potentials
1
Nominal cross section feed-in
6 mm²
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Nominal voltage UN
690 V
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
45.7 mm
Stripping length
10 mm ... 12 mm
Conductor cross section flexible max.
10 mm²
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Flammability rating according to UL 94
V0
Insulating material group
I
Number of levels
1
Color
green
Degree of pollution
3
Maximum total current
57 A (with 10 mm² conductor cross section)
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Power frequency withstand voltage setpoint
1.89 kV
Setpoint
5 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
30.9 mm
Connection in acc. with standard
IEC 60947-7-1
Max. AWG conductor cross section, flexible
10
Value
1 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141120
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Conductor cross section solid min.
1 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 5.1
27141120
Conductor cross section solid max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Connection
Feed-in stage
ECLASS 11.0
27141120
ECLASS 4.1
27141121
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Internal cylindrical gage
A3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ECLASS 7.0
27141120
ECLASS 9.0
27141120
ETIM 7.0
EC000897
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
UNSPSC 6.01
30211811
UNSPSC 11
39121410
UNSPSC 20.0
39121410