3273270 Phoenix Contact Terminal Blocks

Product Details

• Overvoltage category
  III
• Oscillation, broadband noise test result
  Test passed
• Acceleration
  30g
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock duration
  18 ms
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Height
  21.7 mm
• Min. AWG conductor cross section, flexible
  26
• Max. AWG conductor cross section, flexible
  12
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  2.5 mm²
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• Degree of pollution
  3
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Conductor cross section solid min.
  0.34 mm²
• Conductor cross section flexible min.
  0.14 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.34 mm²
ECLASS 10.0.1
27141120
ECLASS 4.1
27141121
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Insulating material group
I
Maximum load current
32 A
Maximum total current
48 A
Finger protection
guaranteed
ASD level
6.12 (m/s2)2/Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Internal cylindrical gage
A3
ECLASS 11.0
27141120
ECLASS 5.0
27141120
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Length
28.6 mm
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
26
Conductor cross section flexible max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ECLASS 9.0
27141120
ETIM 4.0
EC000897
UNSPSC 19.0
39121410
Rated surge voltage
6 kV
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
16 mm
Connection method
Push-in connection
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.1
27141120
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
ECLASS 6.0
27141100
Number of levels
1
Potentials
1
Flammability rating according to UL 94
V0
Nominal voltage UN
450 V
Nominal cross section
2.5 mm²
Open side panel
No
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
UNSPSC 11
39121410
Number of connections
6
Maximum power dissipation for nominal condition
0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
Back of the hand protection
guaranteed
Insulating material
PA
Shock form
Half-sine
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Color
yellow
Nominal current IN
24 A
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)