3273548 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Insulating material
  PA
• Rated surge voltage
  6 kV
• Maximum load current
  41 A
• Maximum total current
  63 A
• Open side panel
  No
• Nominal cross section
  4 mm²
• Overvoltage category
  III
• Nominal current IN
  32 A
• Back of the hand protection
  guaranteed
• Power frequency withstand voltage setpoint
  2 kV
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Result of temperature-rise test
  Test passed
• Result of voltage-drop test
  Test passed
• Potentials
  1
• Flammability rating according to UL 94
  V0
• Degree of pollution
  3
• Nominal voltage UN
  800 V
• Result of surge voltage test
  Test passed
• Bending test rotation speed
  10 rpm
Result of flexion and pull-out test
Test passed
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Shock test result
Test passed
Test duration per axis
5 h
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Number of connections
6
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Setpoint
5 N
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Shock form
Half-sine
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
58.1 mm
Stripping length
10 mm ... 12 mm
Conductor cross section AWG min.
24
UNSPSC 20.0
39121410
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Color
gray
Maximum power dissipation for nominal condition
1.02 W (the value is based on one connection block and is multiplied according to the pin assignment)
Finger protection
guaranteed
Result of tight fit on support
Test passed
Tensile test result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 15
30.4 mm
UNSPSC 12.01
39121410
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Conductor cross section short circuit testing
6 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
32.4 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Internal cylindrical gage
A4
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
ECLASS 5.0
27141120
ETIM 7.0
EC000897
UNSPSC 19.0
39121410
Short-time current
0.72 kA
Result of aging test
Test passed
Acceleration
30g
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
10
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141120
ECLASS 9.0
27141120
ETIM 2.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
28.6 mm
Connection method
Push-in connection
Connection in acc. with standard
IEC 60947-7-1
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141120
ETIM 6.0
EC000897
UNSPSC 11
39121410
Max. AWG conductor cross section, flexible
12
Connection cross sections directly pluggable
0.5 mm² 6 mm² 20 10
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 7.0
27141120
ETIM 4.0
EC000897
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
Conductor cross section solid max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.75 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 5.1
27141120
Min. AWG conductor cross section, flexible
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 10.0.1
27141120
ECLASS 11.0
27141120