3273640 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  4 mm²
• Flammability rating according to UL 94
  V0
• Maximum load current
  63 A
• Degree of pollution
  3
• Nominal voltage UN
  800 V
• Finger protection
  guaranteed
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
• Setpoint
  5 N
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Result of thermal test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test duration per axis
  5 h
• Nominal cross section feed-in
  10 mm²
• Overvoltage category
  III
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of power-frequency withstand voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Result of tight fit on support
  Test passed
• Short circuit stability result
  Test passed
• Result of aging test
  Test passed
Shock test result
Test passed
Number of shocks per direction
3
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
28.6 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141121
ECLASS 10.0.1
27141120
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
Potentials
1
Color
red
Nominal current IN
32 A
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Result of temperature-rise test
Test passed
Short-time current
1.2 kA
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
32.4 mm
Conductor cross section solid max.
6 mm²
Max. AWG conductor cross section, flexible
12
Connection cross sections directly pluggable
0.5 mm² 6 mm² 20 10
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 9.0
27141120
UNSPSC 13.2
39121410
Number of levels
1
Insulating material
PA
Maximum total current
63 A
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
2 kV
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
10 mm²
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Test directions
X-, Y- and Z-axis (pos. and neg.)
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Push-in connection
Min. AWG conductor cross section, flexible
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A4
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141121
ECLASS 5.1
27141120
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Number of connections
19
Rated surge voltage
6 kV
Insulating material group
I
Open side panel
No
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 15
30.4 mm
Value
0.75 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
58.1 mm
Connection
Feed-in stage
Stripping length
10 mm ... 12 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.2 mm²
Conductor cross section AWG min.
24
Conductor cross section flexible max.
4 mm²