3273670 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  6
• Rated surge voltage
  6 kV
• Insulating material group
  I
• Nominal current IN
  32 A
• Potentials
  1
• Insulating material
  PA
• Degree of pollution
  3
• Open side panel
  No
• Nominal cross section
  4 mm²
• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
• Flammability rating according to UL 94
  V0
• ECLASS 4.1
  27141120
• ECLASS 11.0
  27141120
• ECLASS 5.1
  27141120
• ETIM 6.0
  EC000897
• UNSPSC 6.01
  30211811
• UNSPSC 12.01
  39121410
• Number of levels
  1
• Overvoltage category
  III
• Maximum total current
  63 A
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ETIM 2.0
EC000897
ETIM 7.0
EC000897
UNSPSC 20.0
39121410
Color
white
Maximum load current
41 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
2 kV
ECLASS 4.0
27141120
ETIM 3.0
EC000897
ECLASS 9.0
27141120
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Maximum power dissipation for nominal condition
1.02 W (the value is based on one connection block and is multiplied according to the pin assignment)
Result of surge voltage test
Test passed
UNSPSC 21.0
39121410
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of aging test
Test passed
ECLASS 5.0
27141120
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Nominal voltage UN
800 V
Finger protection
guaranteed
Tight fit on carrier
NS 35
Result of temperature-rise test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Bending test rotation speed
10 rpm
Setpoint
5 N
Conductor cross section short circuit testing
6 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/7,5
30.9 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Connection cross sections directly pluggable
0.5 mm² 6 mm² 20 10
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section solid max.
6 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Internal cylindrical gage
A4
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Back of the hand protection
guaranteed
Bending test turns
135
Result of tight fit on support
Test passed
Short-time current
0.72 kA
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Shock test result
Test passed
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
18.5 mm
Connection method
Push-in connection
Stripping length
10 mm ... 12 mm
Conductor cross section AWG max.
10
Min. AWG conductor cross section, flexible
24
Result of thermal test
Test passed
Acceleration
30g
Shock duration
18 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
0.5 mm²
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.75 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
45.7 mm
Connection in acc. with standard
IEC 60947-7-1
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)