3273728 Phoenix Contact Terminal Blocks
Part#:3273728
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Distribution block, nominal current: 57 A, connection method: Push-in connection, Push-in connection, number of connections: 7, cross section: 0.5 mm² - 10 mm², AWG: 20 - 6, width: 27.9 mm, color: red, mounting type: NS 35/7,5, NS 35/15
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3273728 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Number of levels 1
- Nominal cross section feed-in 10 mm²
- Rated surge voltage 6 kV
- Maximum total current 63 A
- Number of connections 7
- Color red
- Degree of pollution 3
- Overvoltage category III
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Nominal cross section 4 mm²
- Flammability rating according to UL 94 V0
- Back of the hand protection guaranteed
- Potentials 1
- Insulating material group I
- Nominal current IN 32 A
- Nominal voltage UN 800 V
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Bending test conductor cross section/weight 0.5 mm² / 0.3 kg
- Insulating material PA
- Maximum load current 41 A
- Open side panel No
- Result of surge voltage test Test passed
- Bending test turns 135
- Result of voltage-drop test Test passed
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Oscillation, broadband noise test result Test passed
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Number of shocks per direction 3
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Connection Feed-in stage
- Conductor cross section AWG min. 24
- Ageing test for screwless modular terminal block temperature cycles 192
- Shock duration 18 ms
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Surface flammability NFPA 130 (ASTM E 162) passed
- Conductor cross section solid min. 0.5 mm²
- Connection in acc. with standard IEC 60998-2-2
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm²
- Ambient temperature (actuation) -5 °C ... 70 °C
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 6.0 27141100
- UNSPSC 6.01 30211811
- UNSPSC 12.01 39121410
- UNSPSC 19.0 39121410
- Finger protection guaranteed
- Setpoint 5 N
- Short circuit stability result Test passed
- Result of aging test Test passed
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Shock test result Test passed
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Connection method Push-in connection
- Conductor cross section flexible max. 4 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 1 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 4.1 27141121
- UNSPSC 7.0901 39121410
- UNSPSC 18.0 39121410
- Bending test rotation speed 10 rpm
- Result of tight fit on support Test passed
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Shock form Half-sine
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Width 27.9 mm
- Height NS 35/7,5 30.9 mm
- Min. AWG conductor cross section, flexible 24
- Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm²
- Result of power-frequency withstand voltage test Test passed
- Tensile test result Test passed
- Note The max. load current must not be exceeded by the total current of all connected conductors.
- Test spectrum Service life test category 2, bogie-mounted
- Test duration per axis 5 h
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Conductor cross section AWG max. 10
- Conductor cross section solid max. 6 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.2 mm²
- Connection cross sections directly pluggable 0.5 mm² 6 mm² 20 10
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 11.0 27141120
- ECLASS 7.0 27141120
- ETIM 6.0 EC000897
- Power frequency withstand voltage setpoint 2 kV
- Tight fit on carrier NS 35
- Short-time current 1.2 kA
- Conductor cross section short circuit testing 10 mm²
- Acceleration 30g
- Static insulating material application in cold -60 °C
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Length 45.7 mm
- Conductor cross section flexible min. 0.2 mm²
- Value 0.75 mm²
- ECLASS 4.0 27141121
- ECLASS 5.1 27141120
- ETIM 4.0 EC000897
- UNSPSC 11 39121410
- Result of flexion and pull-out test Test passed
- Result of temperature-rise test Test passed
- Result of thermal test Test passed
- Proof of thermal characteristics (needle flame) effective duration 30 s
- ASD level 6.12 (m/s2)2/Hz
- Stripping length 10 mm ... 12 mm
- Max. AWG conductor cross section, flexible 12
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.2 mm²
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ETIM 3.0 EC000897
- ETIM 7.0 EC000897
- UNSPSC 13.2 39121410
- UNSPSC 21.0 39121410
- Internal cylindrical gage A4
- ECLASS 10.0.1 27141120
- ECLASS 5.0 27141120
- ECLASS 9.0 27141120
- UNSPSC 20.0 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨