3273734 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  4 mm²
• Color
  brown
• Overvoltage category
  III
• Degree of pollution
  3
• Maximum total current
  63 A
• Nominal voltage UN
  800 V
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Open side panel
  No
• Result of power-frequency withstand voltage test
  Test passed
• Tensile test result
  Test passed
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Result of surge voltage test
  Test passed
• Finger protection
  guaranteed
• Tight fit on carrier
  NS 35
• Insulating material
  PA
• Insulating material group
  I
• Nominal current IN
  32 A
• Back of the hand protection
  guaranteed
• Width
  27.9 mm
• ECLASS 5.0
  27141120
Number of connections
7
Potentials
1
Nominal cross section feed-in
10 mm²
Rated surge voltage
6 kV
Power frequency withstand voltage setpoint
2 kV
Bending test turns
135
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
10 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Shock duration
18 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection
Feed-in stage
Connection method
Push-in connection
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.2 mm²
Internal cylindrical gage
A4
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
Maximum load current
41 A
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
30.9 mm
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible min.
0.2 mm²
Max. AWG conductor cross section, flexible
12
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Connection cross sections directly pluggable
0.5 mm² 6 mm² 20 10
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ECLASS 10.0.1
27141120
ETIM 4.0
EC000897
ECLASS 7.0
27141120
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Number of levels
1
Flammability rating according to UL 94
V0
Bending test rotation speed
10 rpm
Setpoint
5 N
Short circuit stability result
Test passed
Short-time current
1.2 kA
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Test duration per axis
5 h
Test directions
X-, Y- and Z-axis (pos. and neg.)
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
45.7 mm
Stripping length
10 mm ... 12 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Value
0.75 mm²
ECLASS 11.0
27141120
ECLASS 4.1
27141121
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
Result of flexion and pull-out test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section AWG min.
24
Min. AWG conductor cross section, flexible
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 9.0
27141120
ETIM 7.0
EC000897
ETIM 6.0
EC000897
UNSPSC 20.0
39121410
ECLASS 5.1
27141120
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
UNSPSC 11
39121410
UNSPSC 21.0
39121410