3273824 Phoenix Contact Terminal Blocks

Product Details

• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
• Number of connections
  12
• Insulating material
  PA
• Nominal cross section
  4 mm²
• Rated surge voltage
  6 kV
• Overvoltage category
  III
• Maximum power dissipation for nominal condition
  1.02 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  4 mm²
• Internal cylindrical gage
  A4
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• ECLASS 4.0
  27141120
• ECLASS 9.0
  27141120
• ECLASS 7.0
  27141120
• ETIM 7.0
  EC000897
• UNSPSC 7.0901
  39121410
• UNSPSC 12.01
  39121410
• UNSPSC 20.0
  39121410
• Number of levels
  1
• Potentials
  1
Color
white
Flammability rating according to UL 94
V0
Degree of pollution
3
Insulating material group
I
Maximum load current
63 A
Nominal current IN
32 A
Open side panel
No
Back of the hand protection
guaranteed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Result of thermal test
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Connection cross sections directly pluggable
0.5 mm² 6 mm² 20 10
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141120
ECLASS 5.1
27141120
ETIM 3.0
EC000897
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
28.6 mm
Connection in acc. with standard
IEC 60998-2-2
Connection method
Push-in connection
Conductor cross section flexible min.
0.2 mm²
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 5.0
27141120
ECLASS 6.0
27141100
ETIM 2.0
EC000897
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Finger protection
guaranteed
Maximum total current
41 A
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height
21.7 mm
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible max.
4 mm²
Nominal voltage UN
450 V
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Proof of thermal characteristics (needle flame) effective duration
30 s
Surface flammability NFPA 130 (ASTM E 162)
passed
Conductor cross section AWG min.
24
Min. AWG conductor cross section, flexible
24
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section solid max.
6 mm²
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
36.9 mm
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.75 mm²