X20SD1207 B&R Electronic Components

Product Details

• Temperature Operation Vertical mounting orientation
  0 to 50°C
• IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 PFH / PFHd openSAFETY wireless
  <1*10-14 * Number of openSAFETY packets per hour
• IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 PFH / PFHd openSAFETY wired
  Negligible
• Temperature Operation Horizontal mounting orientation
  0 to 60°C
• Relative humidity Operation
  5 to 95%, non-condensing
• Relative humidity Transport
  5 to 95%, non-condensing
• IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 PFH / PFHd Per channel
  <1*10-10
• Relative humidity Storage
  5 to 95%, non-condensing
• Temperature Transport
  -40 to 85°C
• Mounting orientation Vertical
  Yes
• Temperature Derating
  See section "Derating".
• Mounting orientation Horizontal
  Yes
• Temperature Storage
  -40 to 85°C
• Switching threshold High
  >15 VDC
• Input filter Hardware
  <10 µs
• Switching threshold Low
  <5 VDC
• Protective measures Short-circuit proof
  Thermal limit determined by PTC
• IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 PFD
  <2*10-5
• Input filter Software
  Configurable between 0 and 100 s
• IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 Proof test interval (PT)
  20 years
EN ISO 13849-1:2015 MTTFD
2500 years
IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 SIL CL
SIL 3
EN ISO 13849-1:2015 PL
PL e
EN ISO 13849-1:2015 Mission time
Max. 20 years
IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 SFF
>90%
EN ISO 13849-1:2015 DC
>94%
Certifications EAC
Yes
EN ISO 13849-1:2015 Category
Cat. 4; The special instructions in chapter "Connection examples" must be taken into account.
Certifications ABS
Yes
Certifications KR
Yes
Certifications LR
ENV1
Certifications UKCA
Yes
Certifications ATEX
Zone 2, II 3G Ex nA nC IIA T5 Gc; IP20, Ta (see X20 user's manual); FTZÚ 09 ATEX 0083X
Certifications HazLoc
cCSAus 244665; Process control equipment; for hazardous locations; Class I, Division 2, Groups ABCD, T5
Certifications DNV
Temperature: A (0 - 45°C); Humidity: B (up to 100%); Vibration: A (0.7 g); EMC: B (bridge and open deck)
Certifications UL
cULus E115267; Industrial control equipment
Certifications Functional safety
cULus FSPC E361559; Energy and industrial systems; Certified for functional safety; ANSI UL 1998:2013
Certifications CE
Yes
Blackout mode Function
Module functionality
Electrical isolation Channel - Channel
No
Blackout mode Standalone mode
No
Diagnostics Inputs
Yes, using LED status indicator and software
Blackout mode Scope
Module
Power consumption Bus
0.25 W
Power consumption Internal I/O
0.75 W
Electrical isolation Channel - Bus
Yes
Diagnostics Module run/error
Yes, using LED status indicator and software
System requirements mapp Technology Package
mapp Safety 5.7.0 or later
System requirements Safety Release
1.5 or later
Pitch
25+0.2 mm
System requirements Automation Studio
3.0.90 or later
System requirements SafeDESIGNER
2.91 or later
System requirements Automation Runtime
3.00 or later
Note
Order 1x safety-keyed terminal block separately.; Order 1x safety-keyed bus module separately.
Degree of protection per EN 60529
IP20
Line length
Max. 30 m shielded
Input resistance
9.68 kΩ
Installation elevation above sea level
0 to 2000 m, no limitation
Insulation voltage between channel and bus
500 Veff
Input current at 24 VDC
Min. 2 mA to max. 2.48 mA
Input voltage
24 VDC -15% / +20%
Input characteristics per EN 61131-2
Type 1
Variant
Type A
Input frequency
Max. 7 kHz
Input circuit
Sink
Integrated protection
Reverse polarity protection
Quantity
1
Voltage range
24 VDC -15% / +20%
Nominal voltage
24 VDC
B&R ID code
0xCAC1
I/O module
1 safe type A digital counter channel, 7 kHz, 24 VDC
Max. I/O cycle time
2 ms
Output voltage
I/O power supply minus voltage drop due to RDS(on)
Nominal output current
80 mA
RDS(on)
10 Ω
Additional power dissipation caused by actuators (resistive) [W]
0.064
Status indicators
I/O function per channel, operating state, module status

Related documents X20SD1207 Specs