X20SO2120 B&R Electronic Components
Part#:X20SO2120
Manufacturer:B&R
Product Lifecycle:Active
In-stock parts: 1
Dec 23, 2024
X20 safe digital output module, 2 safe type A digital outputs, with current monitoring, 24 VDC, 2 A, OSSD <500 µs
Check out the X20SO2120 B&R price in the box on the right side or send a quick quote.
Product Details
- Temperature Operation Vertical mounting orientation 0 to 50°C
- Temperature Operation Horizontal mounting orientation 0 to 60°C
- IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 PFH / PFHd Per channel <1*10-10
- IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 PFH / PFHd openSAFETY wireless <1*10-14 * Number of openSAFETY packets per hour
- IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 PFH / PFHd openSAFETY wired Negligible
- Relative humidity Transport 5 to 95%, non-condensing
- Relative humidity Storage 5 to 95%, non-condensing
- Relative humidity Operation 5 to 95%, non-condensing
- Temperature Transport -40 to 85°C
- Temperature Derating See section "Derating".
- Temperature Storage -40 to 85°C
- Mounting orientation Vertical Yes
- Mounting orientation Horizontal Yes
- IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 PFD <2*10-5
- IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 SFF >60% if parameter "Disable OSSD = Yes - Warning", ; >90% if parameter "Disable OSSD = No"
- IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 Proof test interval (PT) 20 years
- IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 SIL CL SIL 2 if parameter "Disable OSSD = Yes - Warning", ; SIL 3 if parameter "Disable OSSD = No"
- EN ISO 13849-1:2015 MTTFD 2500 years
- EN ISO 13849-1:2015 Mission time Max. 20 years
- EN ISO 13849-1:2015 DC >60% if parameter "Disable OSSD = Yes - Warning", ; >94% if parameter "Disable OSSD = No"
- EN ISO 13849-1:2015 PL PL d if parameter "Disable OSSD = Yes - Warning", ; PL e if parameter "Disable OSSD = No"
- Certifications ABS Yes
- EN ISO 13849-1:2015 Category Cat. 3 if parameter "Disable OSSD = Yes - Warning", ; Cat. 4 if parameter "Disable OSSD = No"
- Certifications KC Yes
- Certifications EAC Yes
- Certifications KR Yes
- Certifications HazLoc cCSAus 244665; Process control equipment; for hazardous locations; Class I, Division 2, Groups ABCD, T5
- Certifications LR ENV1
- Certifications DNV Temperature: A (0 - 45°C); Humidity: B (up to 100%); Vibration: A (0.7 g); EMC: B (bridge and open deck)
- Certifications ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc; IP20, Ta (see X20 user's manual); FTZÚ 09 ATEX 0083X
- Certifications UKCA Yes
- Electrical isolation Channel - Bus Yes
- Certifications UL cULus E115267; Industrial control equipment
- Certifications CE Yes
- Electrical isolation Channel - Channel No
- Certifications Functional safety cULus FSPC E361559; Energy and industrial systems; Certified for functional safety; ANSI UL 1998:2013
- Blackout mode Standalone mode No
- Power consumption Internal I/O 0.98 W
- Power consumption Bus 0.25 W
- Blackout mode Scope Module
- Diagnostics Outputs Yes, using LED status indicator and software
- Blackout mode Function Module functionality
- Pitch 25+0.2 mm
- System requirements mapp Technology Package mapp Safety 5.7.0 or later
- System requirements Automation Studio 3.0.71 or later
- Diagnostics Module run/error Yes, using LED status indicator and software
- System requirements Safety Release 1.1 or later
- System requirements SafeDESIGNER 2.58 or later
- System requirements Automation Runtime 2.95 or later
- Note Order 1x safety-keyed terminal block separately.; Order 1x safety-keyed bus module separately.
- Installation elevation above sea level 0 to 2000 m, no limitation
- Test pulse length Max. 500 µs
- Degree of protection per EN 60529 IP20
- Time between two test pulses Min. 49.5 ms
- Max. capacitive load 100 nF
- Max. switching frequency See section "Inrush current behavior for output channels".
- RDS(on) 240 mΩ
- Switching voltage I/O power supply minus voltage drop due to RDS(on)
- Insulation voltage between channel and bus 500 Veff
- Open-circuit detection Via internal current measurement, ; output current <10 mA: Signal "CurrentOK" = FALSE, ; output current 10 to 50 mA: Signal "CurrentOK" = Undefined, ; output current >50 mA: Signal "CurrentOK" = TRUE
- Peak short-circuit current See section "Inrush current behavior for output channels".
- Nominal output current 2 A
- Variant FET, 1x positive switching, 1x negative switching, type A, output level readable, open-circuit detection
- Error detection time 1 s
- Leakage current when the output is switched off <10 µA
- Output protection See section "Inrush current behavior for output channels".
- Braking voltage when switching off inductive loads Max. 90 VDC
- Total nominal current 4 A
- Max. I/O cycle time 800 µs
- Additional power dissipation caused by actuators (resistive) [W] 1.92
- Voltage range 24 VDC -15% / +20%
- Quantity 2
- B&R ID code 0x2009
- Nominal voltage 24 VDC
- Integrated protection Reverse polarity protection
- Status indicators I/O function per channel, operating state, module status
- I/O module 2 safe type A digital outputs, with current monitoring, 24 VDC, 2 A, OSSD <500 µs
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price within minutes.
Stock:
1
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of B&R
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
B&R Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many B&R Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from B&R, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
