X20SO6530 B&R Electronic Components

Product Details

• Safe relay channels EN ISO 13849-1:2015 Category
  Cat. 1 if the relay channel is used individually, ; Cat. 4 if 2 relay channels are connected in series
• Temperature Operation Horizontal mounting orientation
  0 to 60°C
• Temperature Operation Vertical mounting orientation
  0 to 50°C
• Safe relay channels IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 SIL CL
  SIL 1 if the relay channel is used individually,; SIL 3 if 2 relay channels are connected in series
• IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 PFH / PFHd openSAFETY wireless
  <1*10-14 * Number of openSAFETY packets per hour
• IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 PFH / PFHd openSAFETY wired
  Negligible
• Safe relay channels EN ISO 13849-1:2015 PL
  PL c if the relay channel is used individually,; PL e if 2 relay channels are connected in series
• IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 PFH / PFHd Per channel
  <1*10-10
• Relative humidity Storage
  5 to 95%, non-condensing
• Certifications Relays EN 50205
  Yes
• Certifications Relays EN 50155
  No
• Relative humidity Transport
  5 to 95%, non-condensing
• Temperature Transport
  -40 to 85°C
• Relative humidity Operation
  5 to 95%, non-condensing
• Temperature Storage
  -40 to 85°C
• Temperature Derating
  See section "Derating".
• Mounting orientation Vertical
  Yes
• Mounting orientation Horizontal
  Yes
• Max. switching capacity UL 508
  B300 / R300
• Max. switching capacity DC1
  24 VDC / 6 A
Max. switching capacity DC13
24 VDC / 4 A / 0.1 Hz
Max. switching capacity AC15
230 VAC / 5 A
IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 Proof test interval (PT)
20 years
Switching delay 0 → 1
<50 ms
Switching delay 1 → 0
<50 ms; Hardware upgrade 2.2.0.0 or later: <20 ms
Max. switching capacity AC1
230 VAC / 6 A
IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 PFD
<2*10-5
Certifications UL
cULus E115267; Industrial control equipment
Certifications UKCA
Yes
Certifications CE
Yes
Certifications DNV
In preparation
EN ISO 13849-1:2015 Mission time
Max. 20 years
Certifications ATEX
Zone 2, II 3G Ex nA nC IIA T5 Gc; IP20, Ta (see X20 user's manual); FTZÚ 09 ATEX 0083X
Certifications EAC
Yes
EN ISO 13849-1:2015 MTTFD
2500 years
Certifications Functional safety
cULus FSPC E361559; Energy and industrial systems; Certified for functional safety; ANSI UL 1998:2013
Electrical isolation Channel - Channel
Yes
Blackout mode Function
Module functionality
Power consumption Internal I/O
1.65 W
Electrical isolation Channel - Bus
Yes
Power consumption Bus
0.26 W
Blackout mode Scope
Module
System requirements mapp Technology Package
mapp Safety 5.7.0 or later
Blackout mode Standalone mode
No
Diagnostics Module run/error
Yes, using LED status indicator and software
Diagnostics Outputs
Yes, using LED status indicator and software
System requirements Safety Release
1.10 or later
System requirements SafeDESIGNER
4.2.0 or later
System requirements Automation Runtime
4.2 or later
System requirements Automation Studio
4.2.5 or later
Pitch
25+0.2 mm
Degree of protection per EN 60529
IP20
Note
Order 1x safety-keyed terminal block separately.; Order 1x safety-keyed bus module separately.
Max. inrush current
AC: 50 A for 100 ms, DC: 10 A for 200 ms
Installation elevation above sea level
0 to 2000 m, no limitation
Overvoltage category per EN 60664-1
II
Nominal output current
5 mA to 6 A (hardware revision
Short-circuit proof
Yes, 1000 A (with specified short-circuit/overload protection)
Coil voltage
24 VDC -15% / +20%
Contact resistance (without terminal block)
20 mΩ
Contact service life
See "Contact service life".
Short-circuit/Overload protection
External 6 A gL/gG fuse (melting fuse), LS automat C characteristic 1.6 A
Switching voltage range
5 to 24 VDC, 5 to 230 VAC
Diagnostic status
Contact position determined by positively driven contacts
Max. switching frequency
See section "Inrush current behavior for output channels".
Insulation voltage between channel and channel
Tested at 1350 VAC
Insulation voltage between channel and bus
Safe disconnection of 300 VAC per EN 50178
Variant
Relay / Normally open contact, internal high-side and low-side control
Integrated protection
Reverse polarity protection
Nominal voltage
24 VDC
Additional power dissipation caused by actuators (resistive) [W]
4.32
I/O module
6 relays with 1 normally open contact each, 230 VAC / 6 A, 24 VDC / 6 A
Quantity
6
B&R ID code
0xF22A
Max. I/O cycle time
1 ms
Status indicators
I/O function per channel, operating state, module status
Voltage range
24 VDC -15% / +20%

Related documents X20SO6530 Specs