1046987 Phoenix Contact Terminal Blocks
Part#:1046987
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 17
Dec 25, 2024
Distribution block, nominal current: 41 A, connection method: Push-in connection, Push-in connection, number of connections: 13, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 31.4 mm, color: red, mounting type: NS 15
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1046987 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Number of connections 13
- Insulating material PA
- Insulating material group I
- Number of levels 1
- Flammability rating according to UL 94 V0
- Overvoltage category III
- Open side panel No
- Result of surge voltage test Test passed
- Conductor cross section flexible, with ferrule with plastic sleeve max. 1.5 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Ambient temperature (actuation) -5 °C ... 70 °C
- Value 0.34 mm²
- Back of the hand protection guaranteed
- Result of flexion and pull-out test Test passed
- Result of voltage-drop test Test passed
- Short circuit stability result Test passed
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05
- ASD level 6.12 (m/s2)2/Hz
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Number of shocks per direction 3
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Width 31.4 mm
- Connection in acc. with standard IEC 60947-7-1
- Conductor cross section solid max. 2.5 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm²
- Internal cylindrical gage A3
- Nominal cross section 1.5 mm²
- Maximum load current 22 A (with a 2.5 mm² conductor cross section)
- Nominal voltage UN 500 V
- Power frequency withstand voltage setpoint 1.89 kV
- Bending test rotation speed 10 rpm
- Setpoint 5 N
- Short-time current 0.3 kA
- Result of aging test Test passed
- Test spectrum Service life test category 2, bogie-mounted
- Shock test result Test passed
- Shock duration 18 ms
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Connection Pick-off level
- Connection method Push-in connection
- Conductor cross section AWG max. 14
- Conductor cross section flexible max. 1.5 mm²
- Nominal cross section feed-in 4 mm²
- Rated surge voltage 6 kV
- Maximum total current 32 A
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Bending test conductor cross section/weight 0.2 mm² / 0.2 kg
- Result of tight fit on support Test passed
- Result of temperature-rise test Test passed
- Result of thermal test Test passed
- Oscillation, broadband noise test result Test passed
- Acceleration 30g
- Static insulating material application in cold -60 °C
- Calorimetric heat release NFPA 130 (ASTM E 1354) 27,5 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Stripping length 8 mm ... 10 mm
- Conductor cross section flexible min. 0.14 mm²
- Ambient temperature (assembly) -5 °C ... 70 °C
- Color red
- Degree of pollution 3
- Nominal current IN 17.5 A
- Bending test turns 135
- Tensile test result Test passed
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test duration per axis 5 h
- Shock form Half-sine
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Length 21.6 mm
- Conductor cross section solid min. 0.34 mm²
- Conductor cross section AWG min. 26
- Max. AWG conductor cross section, flexible 14
- Connection cross sections directly pluggable 0.34 mm² 2.5 mm²
- ECLASS 10.0.1 27141120
- ETIM 6.0 EC000897
- Finger protection guaranteed
- Result of power-frequency withstand voltage test Test passed
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Tight fit on carrier NS 35/NS 15
- Conductor cross section short circuit testing 2.5 mm²
- Ageing test for screwless modular terminal block temperature cycles 192
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2018-05
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Height NS 15 27.4 mm
- Min. AWG conductor cross section, flexible 26
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 11.0 27141120
- Conductor cross section flexible, with ferrule without plastic sleeve max. 1.5 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm²
- ETIM 7.0 EC000897
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 9.0 27141120
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$8.40
Stock:
17
Select Qty:
$8.40
$8.40 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨