1046613 Phoenix Contact Terminal Blocks

Product Details

• Color
  green
• Insulating material group
  I
• Nominal current IN
  17.5 A
• Acceleration
  30g
• Shock form
  Half-sine
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Connection in acc. with standard
  IEC 60998-2-2
• Min. AWG conductor cross section, flexible
  24
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 5.0
  27141120
• UNSPSC 6.01
  30211811
• ETIM 6.0
  EC000897
• UNSPSC 13.2
  39121410
• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
• Potentials
  1
• Result of aging test
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
21.6 mm
Conductor cross section solid max.
2.5 mm²
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Nominal cross section
1.5 mm²
Overvoltage category
III
Maximum power dissipation for nominal condition
0.56 W
Setpoint
1 N
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Conductor cross section AWG max.
14
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 26 14
Internal cylindrical gage
A1 / B1
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141121
ECLASS 7.0
27141120
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Number of levels
1
Insulating material
PA
Flammability rating according to UL 94
V0
Open side panel
No
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
8.3 mm
Height
17.7 mm
Conductor cross section flexible min.
0.14 mm²
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141120
ECLASS 5.1
27141120
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Number of connections
4
Degree of pollution
3
Maximum load current
22 A
Conductor cross section short circuit testing
2.5 mm²
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 18.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141121
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Rated surge voltage
6 kV
Finger protection
guaranteed
Surge voltage test setpoint
7.3 kV
Power frequency withstand voltage setpoint
1.89 kV
Bending test rotation speed
10 rpm
Result of voltage-drop test
Test passed
Back of the hand protection
guaranteed
Tensile test result
Test passed
Tight fit on carrier
NS 35/NS 15
Short-time current
0.3 kA
Maximum total current
26 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Tractive force setpoint
50 N
Conductor cross section solid min.
0.34 mm²
Nominal voltage UN
450 V
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Conductor cross section tensile test
2.5 mm²
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of tight fit on support
Test passed
Connection method
Push-in connection