1046619 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  1.5 mm²
• Flammability rating according to UL 94
  V0
• Maximum load current
  22 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Setpoint
  1 N
• Result of temperature-rise test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Acceleration
  30g
• Shock form
  Half-sine
• ECLASS 9.0
  27141120
• ETIM 4.0
  EC000897
• UNSPSC 19.0
  39121410
• Number of connections
  4
• Degree of pollution
  3
• Nominal voltage UN
  450 V
• Result of power-frequency withstand voltage test
  Test passed
• Bending test turns
  135
• Short circuit stability result
  Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Result of thermal test
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
21.6 mm
ECLASS 5.1
27141120
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Number of levels
1
Insulating material
PA
Maximum power dissipation for nominal condition
0.56 W
Maximum total current
26 A
Result of surge voltage test
Test passed
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Color
orange
Overvoltage category
III
Open side panel
No
Power frequency withstand voltage setpoint
1.89 kV
ECLASS 7.0
27141120
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Potentials
1
Rated surge voltage
6 kV
Insulating material group
I
Nominal current IN
17.5 A
Surge voltage test setpoint
7.3 kV
ECLASS 4.1
27141121
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Tensile test result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
8.3 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section AWG max.
14
Conductor cross section flexible max.
1.5 mm²
Internal cylindrical gage
A1 / B1
Ambient temperature (assembly)
-5 °C ... 70 °C
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height
17.7 mm
Connection method
Push-in connection
Conductor cross section AWG min.
26
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141120
ECLASS 5.0
27141120
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35/NS 15
Short-time current
0.3 kA
Conductor cross section short circuit testing
2.5 mm²
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
0.34 mm²
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 26 14
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141121
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section solid max.
2.5 mm²
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
ECLASS 10.0.1
27141120
Ambient temperature (actuation)
-5 °C ... 70 °C