1046611 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  0.56 W
• Finger protection
  guaranteed
• Nominal cross section
  1.5 mm²
• Overvoltage category
  III
• Maximum total current
  26 A
• Back of the hand protection
  guaranteed
• Surge voltage test setpoint
  7.3 kV
• Result of flexion and pull-out test
  Test passed
• Conductor cross section tensile test
  2.5 mm²
• Result of temperature-rise test
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Acceleration
  30g
• Number of shocks per direction
  3
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Stripping length
  8 mm ... 10 mm
• Conductor cross section flexible max.
  1.5 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Potentials
1
Insulating material group
I
Degree of pollution
3
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Result of surge voltage test
Test passed
Bending test turns
135
Setpoint
1 N
Result of aging test
Test passed
Result of thermal test
Test passed
Test duration per axis
5 h
Shock duration
18 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Color
red
Rated surge voltage
6 kV
Nominal voltage UN
450 V
Open side panel
No
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Tractive force setpoint
50 N
Conductor cross section short circuit testing
2.5 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Number of connections
4
Insulating material
PA
Nominal current IN
17.5 A
Maximum load current
22 A
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35/NS 15
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Shock test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Connection method
Push-in connection
Height
17.7 mm
Conductor cross section flexible min.
0.14 mm²
Max. AWG conductor cross section, flexible
12
Internal cylindrical gage
A1 / B1
ECLASS 10.0.1
27141120
ECLASS 4.1
27141121
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.1
27141120
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 26 14
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141121
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 11
39121410
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Power frequency withstand voltage setpoint
1.89 kV
Result of voltage-drop test
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
21.6 mm
Conductor cross section solid max.
2.5 mm²
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Min. AWG conductor cross section, flexible
24
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Width
8.3 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section AWG min.
26
Ambient temperature (actuation)
-5 °C ... 70 °C
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
ECLASS 5.0
27141120
Short-time current
0.3 kA
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²