2320034 Phoenix Contact DC/DC Converters

Product Details

• Depth
  125 mm
• Installation distance right/left (active)
  15 mm / 15 mm (≤ 70 °C)
• Installation distance top/bottom
  50 mm / 50 mm (≤ 70 °C)
• Max. permissible relative humidity (operation)
  ≤ 95 % (at 25 °C, non-condensing)
• Nominal input voltage range
  24 V DC
• Extended input voltage range in operation
  14 V DC ... 18 V DC (Derating)
• Type of protection
  Transient surge protection
• Nominal output voltage
  24 V DC ±1 %
• Nominal output current (IN)
  5 A (-25 °C ... 60 °C)
• Connection in parallel
  Yes, for redundancy and increased capacity
• Connection in series
  yes
• Height
  130 mm
• Depth with alternative assembly
  35 mm
• Installation distance top/bottom (active)
  50 mm / 50 mm (≤ 70 °C)
• Climatic class
  3K3 (in acc. with EN 60721)
• Inrush current
  < 15 A (typical)
• Height with alternative assembly
  130 mm
• Degree of protection
  IP20
• Ambient temperature (start-up type tested)
  -40 °C
• Width
  32 mm
Installation distance right/left
0 mm / 0 mm (≤ 70 °C)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Input voltage range
18 V DC ... 32 V DC
Current consumption
7 A (24 V, IBOOST)
Recommended breaker for input protection
10 A ... 16 A (Characteristics B, C, D, K)
Protective circuit/component
Varistor
POWER BOOST (IBoost)
6.25 A (-25 °C ... 40 °C permanent, UOUT = 24 V DC )
Selective Fuse Breaking (ISFB)
30 A (12 ms)
Protection against overvoltage at the output (OVP)
< 35 V DC
Feedback voltage resistance
35 V DC
Power loss nominal load max.
11.4 W
Net weight
0.7 kg
Protection class
III
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
12
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
UL approvals
UL/C-UL listed UL 508
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Electromagnetic HF field
EN 61000-4-3
Comments
Criterion A
Width with alternative assembly
122 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C derating, 2.5 %/K, startup at -40°C type-tested)
Degree of pollution
2
Mains buffering time
> 10 ms (24 V DC)
Input fuse
15 A (internal (device protection))
Setting range of the output voltage (USet)
18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
Derating
60 °C ... 70 °C (2.5%/K)
Max. capacitive load
unlimited
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Residual ripple
< 20 mVPP
Peak switching voltages nominal load
< 10 mVPP (20 MHz)
Insulation voltage input/output
1.5 kV (type test)
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
Stripping length
7 mm
EMC requirements for noise immunity
EN 61000-6-1
Standard - Safe isolation
DIN VDE 0100-410
Rail applications
EN 50121-4
Discharge in air
15 kV (Test Level 4)
Frequency range
0.15 MHz ... 80 MHz
Fast transients (burst)
EN 61000-4-4
Input
1 kV (Test Level 2 - symmetrical)
Signal
1 kV (Test Level 2 - asymmetrical)
Conducted interference
EN 61000-4-6
Voltage
10 V (Test Level 3)
Criterion A
Normal operating behavior within the specified limits.
ECLASS 10.0.1
27210901
ECLASS 11.0
27210901
ECLASS 6.0
27210900
ECLASS 4.1
27210900
ECLASS 5.1
27210900
ETIM 4.0
EC002542
UNSPSC 6.01
30211502
UNSPSC 7.0901
39121004
UNSPSC 12.01
39121004
UNSPSC 18.0
39121041
UNSPSC 19.0
39121041
Active current limitation
Approximately 7.2 A
Maximum power dissipation in no-load condition
2.4 W
Efficiency
> 92 %
Mounting position
horizontal DIN rail NS 35, EN 60715
Connection method
Pluggable screw connection
Conductor cross section flexible max.
2.5 mm²
Screw thread
M3
Standard – Safety extra-low voltage
EN 60950-1 (SELV)
EMC requirements for noise emission
EN 61000-6-3
Contact discharge
8 kV (Test Level 4)
Shipbuilding approval
DNV GL (EMC B)
Electrostatic discharge
EN 61000-4-2
Test field strength
10 V/m
Output
1 kV (Test Level 2 - symmetrical)
Surge voltage load (surge)
EN 61000-4-5
I/O/S
asymmetrical
China RoHS
Environmentally Friendly Use Period = 25;
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27210900
ECLASS 5.0
27210900
ECLASS 7.0
27210901
ECLASS 9.0
27210901
ETIM 7.0
EC002046
ETIM 6.0
EC002046
UNSPSC 11
39121004
UNSPSC 13.2
39121041
UNSPSC 21.0
39121041
UNSPSC 20.0
39121041