2320092 Phoenix Contact DC/DC Converters

Product Details

• Width with alternative assembly
  122 mm
• Degree of protection
  IP20
• Ambient temperature (start-up type tested)
  -40 °C
• Nominal input voltage range
  24 V DC
• Mains buffering time
  > 12 ms (24 V DC)
• Protective circuit/component
  Varistor
• POWER BOOST (IBoost)
  12.5 A (-25 °C ... 40 °C permanent, UOUT = 24 V DC )
• Connection in parallel
  Yes, for redundancy and increased capacity
• Active current limitation
  Approx. 18 A
• Power loss nominal load max.
  24 W
• Mounting position
  horizontal DIN rail NS 35, EN 60715
• Width
  48 mm
• Installation distance right/left
  0 mm / 0 mm (≤ 70 °C)
• Installation distance right/left (active)
  15 mm / 15 mm (≤ 70 °C)
• Degree of pollution
  2
• Inrush current
  < 15 A (typical)
• Nominal output voltage
  24 V DC ±1 %
• Connection in series
  yes
• Max. capacitive load
  unlimited
• Control deviation
  < 1 % (change in load, static 10 % ... 90 %)
Efficiency
> 92 %
Connection method
Pluggable screw connection
ECLASS 9.0
27210901
Depth
125 mm
Installation distance top/bottom
50 mm / 50 mm (≤ 70 °C)
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Input voltage range
18 V DC ... 32 V DC
Type of protection
Transient surge protection
Derating
60 °C ... 70 °C (2.5%/K)
Feedback voltage resistance
35 V DC
Residual ripple
< 20 mVPP
Insulation voltage input/output
1.5 kV (type test)
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG max.
12
EMC requirements for noise emission
EN 61000-6-3
Height with alternative assembly
130 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C derating, 2.5 %/K, startup at -40°C type-tested)
Climatic class
3K3 (in acc. with EN 60721)
Extended input voltage range in operation
14 V DC ... 18 V DC (Derating)
Input fuse
25 A (internal (device protection))
Nominal output current (IN)
10 A (-25 °C ... 60 °C)
Protection against overvoltage at the output (OVP)
< 35 V DC
Maximum power dissipation in no-load condition
1.6 W
Net weight
0.9 kg
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Stripping length
7 mm
EMC requirements for noise immunity
EN 61000-6-1
Rail applications
EN 50121-4
Standard – Safety extra-low voltage
EN 60950-1 (SELV)
Electrostatic discharge
EN 61000-4-2
Discharge in air
15 kV (Test Level 4)
Test field strength
10 V/m (Test Level 3)
Input
1 kV (Test Level 2 - symmetrical)
I/O/S
asymmetrical
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 4.0
27210900
ECLASS 5.1
27210900
ECLASS 11.0
27210901
Height
130 mm
Depth with alternative assembly
51 mm
Installation distance top/bottom (active)
50 mm / 50 mm (≤ 70 °C)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Current consumption
14 A (24 V, IBOOST)
Recommended breaker for input protection
16 A ... 20 A (Characteristics B, C, D, K)
Setting range of the output voltage (USet)
18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
Selective Fuse Breaking (ISFB)
60 A (12 ms)
Peak switching voltages nominal load
< 10 mVPP (20 MHz)
Protection class
III
Conductor cross section solid max.
2.5 mm²
Conductor cross section AWG min.
24
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
UL approvals
UL/C-UL listed UL 508
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Electromagnetic HF field
EN 61000-4-3
Comments
Criterion A
Fast transients (burst)
EN 61000-4-4
Conducted interference
EN 61000-4-6
Surge voltage load (surge)
EN 61000-4-5
Voltage
10 V (Test Level 3)
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 5.0
27210900
ECLASS 6.0
27210900
ETIM 6.0
EC002046
UNSPSC 11
39121004
UNSPSC 13.2
39121041
UNSPSC 21.0
39121041
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Screw thread
M3
Standard - Safe isolation
DIN VDE 0100-410
Shipbuilding approval
DNV GL (EMC B)
Contact discharge
8 kV (Test Level 4)
Frequency range
0.15 MHz ... 80 MHz
Output
1 kV (Test Level 2 - symmetrical)
Signal
1 kV (Test Level 2 - asymmetrical)
Criterion A
Normal operating behavior within the specified limits.
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27210901
ECLASS 4.1
27210900
ECLASS 7.0
27210901
ETIM 4.0
EC002542
UNSPSC 6.01
30211502
UNSPSC 12.01
39121004
UNSPSC 18.0
39121041
UNSPSC 20.0
39121041
ETIM 7.0
EC002046
UNSPSC 7.0901
39121004
UNSPSC 19.0
39121041