2320827 Phoenix Contact AC/DC Power Supplies

Product Details

• Height
  130 mm
• Ambient temperature (start-up type tested)
  -40 °C
• Degree of pollution
  2
• Discharge current to PE
  < 3.5 mA
• Mains buffering time
  typ. 25 ms (400 V AC)
• Protective circuit/component
  Varistor
• Connection in parallel
  Yes, for redundancy and increased capacity
• Output power
  960 W
• MTBF (IEC 61709, SN 29500)
  > 890000 h (25 °C)
• Insulation voltage output / PE
  500 V DC (routine test)
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section AWG max.
  10
• Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
  EN 50178/VDE 0160 (PELV)
• UL approvals
  UL Listed UL 508
• Contact discharge
  8 kV (Test Level 4)
• Test field strength
  10 V/m (Test Level 3)
• Input
  2 kV (Test Level 3 - symmetrical)
• Criterion B
  Temporary impairment to operational behavior that is corrected by the device itself.
• ECLASS 11.0
  27040701
• ECLASS 4.0
  27040700
Depth
179 mm
Degree of protection
IP20
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Input voltage range
3x 320 V AC ... 575 V AC
AC frequency range
45 Hz ... 65 Hz
REACh SVHC
Lead 7439-92-1
Recommended breaker for input protection
6 A ... 16 A (AC: Characteristics B, C, D, K)
POWER BOOST (IBoost)
22.5 A (-25 °C ... 40 °C permanent, UOUT = 48 V DC )
Connection in series
yes
Active current limitation
Approx. IBOOST = 22.5 A (for short-circuit)
Typical response time
< 1 s
Housing material
Steel sheet, zinc-plated
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Connection method
Screw connection
Standard - Safety of transformers
IEC 61558-2-17
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Electromagnetic HF field
EN 61000-4-3
Signal
1 kV (Test Level 2 - asymmetrical)
Criterion A
Normal operating behavior within the specified limits.
ECLASS 4.1
27040700
ETIM 4.0
EC002540
UNSPSC 12.01
39121004
Width with alternative assembly
176 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Installation height
4000 m
Nominal power consumption
1386 VA
Nominal output current (IN)
20 A (-25 °C ... 60 °C, UOUT = 48 V DC)
Selective Fuse Breaking (ISFB)
100 A (12 ms)
Protection against overvoltage at the output (OVP)
< 60 V DC
Net weight
2.5 kg
Insulation voltage input / PE
3.5 kV AC (type test)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section flexible min.
0.2 mm²
Stripping length
10 mm
EMC requirements for noise emission
EN 61000-6-3
Standard – Safety extra-low voltage
IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Standard - Approval for medical use
IEC 60601-1, 2 x MOOP
CSA
CAN/CSA-C22.2 No. 60950-1-07
Electrostatic discharge
EN 61000-4-2
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Fast transients (burst)
EN 61000-4-4
Output
1 kV (Test Level 2 - symmetrical)
Voltage
10 V (Test Level 3)
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 5.0
27242200
ETIM 3.0
EC001039
ETIM 6.0
EC002540
UNSPSC 6.01
30211502
UNSPSC 20.0
39121004
Width
96 mm
Height with alternative assembly
130 mm
Climatic class
3K3 (in acc. with EN 60721)
Current consumption
3x 2.1 A (400 V AC)
Type of protection
Transient surge protection
Setting range of the output voltage (USet)
30 V DC ... 56 V DC (> 48 V DC, constant capacity restricted)
Feedback voltage resistance
max. 60 V DC
Residual ripple
< 50 mVPP (with nominal values)
Power loss nominal load max.
70 W
Insulation voltage input/output
4 kV AC (type test)
Protection class
I
Conductor cross section AWG min.
18
EMC requirements for noise immunity
EN 61000-6-1
Standard - Electrical safety
IEC 60950-1/VDE 0805 (SELV)
Standard - Equipment safety
BG (design tested)
Standard - Safe isolation
DIN VDE 0100-410
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Frequency range
0.15 MHz ... 80 MHz
Surge voltage load (surge)
EN 61000-4-5
Conducted interference
EN 61000-4-6
ECLASS 6.0
27049000
ETIM 7.0
EC002540
UNSPSC 21.0
39121004
Depth with alternative assembly
99 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Nominal input voltage range
3x 400 V AC ... 500 V AC
Frequency range DC
0 Hz
Inrush current
< 20 A (typical)
Nominal output voltage
48 V DC ±1 %
Derating
60 °C ... 70 °C (2.5%/K)
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Maximum power dissipation in no-load condition
24 W
Efficiency
> 93 % (at 400 V AC and nominal values)
Conductor cross section solid max.
6 mm²
Conductor cross section flexible max.
4 mm²
Screw thread
M3
Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment
EN 50178
Rail applications
EN 50121-4
Discharge in air
15 kV (Test Level 4)
Comments
Criterion A
I/O/S
asymmetrical
ECLASS 10.0.1
27040701
ECLASS 5.1
27242200
ECLASS 9.0
27040701
UNSPSC 11
39121004
UNSPSC 18.0
39121004
ECLASS 7.0
27049002
UNSPSC 7.0901
39121004
UNSPSC 13.2
39121004
UNSPSC 19.0
39121004