2320898 Phoenix Contact AC/DC Power Supplies

Product Details

• Installation distance right/left
  5 mm / 5 mm
• Climatic class
  3K3 (in acc. with EN 60721)
• Nominal input voltage range
  100 V AC ... 240 V AC
• Dielectric strength maximum
  300 V AC
• Input fuse
  12 A (slow-blow, internal)
• Nominal output voltage
  24 V DC ±1 %
• Selective Fuse Breaking (ISFB)
  120 A (12 ms)
• Residual ripple
  < 30 mVPP (with nominal values)
• Protection against overvoltage at the output (OVP)
  < 32 V DC
• Height
  130 mm
• Installation distance top/bottom
  50 mm / 50 mm
• Max. permissible relative humidity (operation)
  100 % (at 25 °C, non-condensing)
• Depth with alternative assembly
  93 mm
• Discharge in air
  15 kV (Test Level 4)
• Width
  90 mm
• Width with alternative assembly
  122 mm
• Recommended breaker for input protection
  10 A ... 16 A (AC: Characteristics B, C, D, K)
• Electromagnetic HF field
  EN 61000-4-3
• Degree of pollution
  2
• AC frequency range
  45 Hz ... 65 Hz
Mains buffering time
typ. 32 ms (120 V AC)
Setting range of the output voltage (USet)
18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
Derating
60 °C ... 70 °C (2.5%/K)
Installation height
6000 m
Frequency range DC
0 Hz
Nominal power consumption
569 VA
Type of protection
Transient surge protection
POWER BOOST (IBoost)
26 A (-25 °C ... 40 °C permanent, UOUT = 24 V DC )
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Maximum power dissipation in no-load condition
8 W
Efficiency
> 93 % (for 230 V AC and nominal values)
Net weight
1.7 kg
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Conductor cross section AWG max.
10
EMC requirements for noise immunity
EN 61000-6-1
Stripping length
7 mm
Standard - Safe isolation
DIN VDE 0100-410
Rail applications
EN 50121-4
UL approvals
UL/C-UL listed UL 508
DeviceNet approval
DeviceNet™ Power Supply Conformance Tested
Fast transients (burst)
EN 61000-4-4
Degree of protection
IP20
Current consumption
5.1 A (120 V AC)
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Depth
125 mm
Height with alternative assembly
130 mm
Ambient temperature (operation)
-40 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Input voltage range
85 V AC ... 264 V AC
Inrush current
< 20 A
Discharge current to PE
< 3.5 mA
Protective circuit/component
Varistor, gas-filled surge arrester
Nominal output current (IN)
20 A (-25 °C ... 60 °C, UOUT = 24 V DC)
Connection in parallel
Yes, for redundancy and increased capacity
Connection in series
yes
Power loss nominal load max.
40 W
Insulation voltage input/output
4 kV AC (type test)
Insulation voltage output / PE
500 V DC (routine test)
Protection class
I
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
6 mm²
Standard - Electrical safety
IEC 60950-1/VDE 0805 (SELV)
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Standard - Equipment safety
BG (design tested)
Mains variation/undervoltage
SEMI F47-0706 Compliance Certificate
Shipbuilding approval
DNV GL (EMC B, only with upstream filter)
Input
2 kV (Test Level 3 - symmetrical)
Signal
1 kV (Test Level 2 - asymmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 4.0
27040700
ECLASS 4.1
27040700
ECLASS 6.0
27049000
UNSPSC 11
39121004
UNSPSC 13.2
39121004
Feedback voltage resistance
max. 35 V DC
Output power
480 W
Typical response time
< 0.6 s
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG min.
18
HART FSK Physical Layer Test Specification Compliance
Output voltage UOut compliant
Standard – Limitation of mains harmonic currents
EN 61000-3-2
CSA
CAN/CSA-C22.2 No. 60950-1-07
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Contact discharge
8 kV (Test Level 4)
Frequency range
0.15 MHz ... 80 MHz
Surge voltage load (surge)
EN 61000-4-5
Criterion A
Normal operating behavior within the specified limits.
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 5.0
27049000
ETIM 6.0
EC002540
ETIM 7.0
EC002540
UNSPSC 7.0901
39121004
UNSPSC 19.0
39121004
UNSPSC 21.0
39121004
MTBF (IEC 61709, SN 29500)
> 900000 h (25 °C)
Insulation voltage input / PE
3.5 kV AC (type test)
Connection method
Screw connection
Conductor cross section flexible max.
4 mm²
Screw thread
M4
EMC requirements for noise emission
EN 61000-6-3
Standard – Safety extra-low voltage
IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Explosive atmosphere
EN 60079-15 (Zone 2)
SIQ
BG (type approved)
Electrostatic discharge
EN 61000-4-2
Test field strength
10 V/m (Test Level 3)
Conducted interference
EN 61000-4-6
Voltage
10 V (Test Level 3)
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27040701
ECLASS 5.1
27049000
UNSPSC 6.01
30211502
ECLASS 9.0
27040701
UNSPSC 12.01
39121004
UNSPSC 20.0
39121004
Comments
Criterion A
Output
1 kV (Test Level 2 - symmetrical)
I/O/S
asymmetrical
ECLASS 10.0.1
27040701
ETIM 4.0
EC000599
ECLASS 7.0
27049002
UNSPSC 18.0
39121004