2320911 Phoenix Contact AC/DC Power Supplies

Product Details

• Height with alternative assembly
  130 mm
• Installation distance right/left
  5 mm / 5 mm
• Current consumption
  4 A (100 V AC)
• Type of protection
  Transient surge protection
• Selective Fuse Breaking (ISFB)
  60 A (12 ms)
• POWER BOOST (IBoost)
  15 A (-25 °C ... 40 °C permanent, UOUT = 24 V DC )
• Typical response time
  < 0.15 s
• Insulation voltage input / PE
  3.5 kV AC (type test)
• Connection method
  Screw connection
• Screw thread
  M3
• EMC requirements for noise emission
  EN 61000-6-3
• Standard – Safety extra-low voltage
  IEC 60950-1 (SELV) and EN 60204-1 (PELV)
• Explosive atmosphere
  EN 60079-15 (Zone 2)
• DeviceNet approval
  DeviceNet™ Power Supply Conformance Tested
• Electrostatic discharge
  EN 61000-4-2
• Electromagnetic HF field
  EN 61000-4-3
• Frequency range
  0.15 MHz ... 80 MHz
• Input
  2 kV (Test Level 3 - symmetrical)
• Signal
  1 kV (Test Level 2 - asymmetrical)
• China RoHS
  Environmentally Friendly Use Period = 25;
ECLASS 5.1
27049000
ECLASS 9.0
27040701
UNSPSC 7.0901
39121004
UNSPSC 13.2
39121004
UNSPSC 20.0
39121004
Dielectric strength maximum
300 V AC
Input fuse
10 A (slow-blow, internal)
Protective circuit/component
Varistor, gas-filled surge arrester
Connection in series
yes
Maximum power dissipation in no-load condition
9.1 W
Efficiency
typ. 92.5 % (230 V AC)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section AWG max.
12
EMC requirements for noise immunity
EN 61000-6-1
Standard - Equipment safety
BG (design tested)
UL approvals
UL/C-UL listed UL 508
SIQ
BG (type approved)
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Test field strength
10 V/m (Test Level 3)
Fast transients (burst)
EN 61000-4-4
Surge voltage load (surge)
EN 61000-4-5
REACh SVHC
Lead 7439-92-1
Voltage
10 V (Test Level 3)
ECLASS 7.0
27049002
UNSPSC 6.01
30211502
UNSPSC 12.01
39121004
Nominal power consumption
303 VA
Recommended breaker for input protection
10 A ... 20 A (AC: Characteristics B, C, D, K)
Setting range of the output voltage (USet)
18 V DC ... 29.5 V DC (> 24 V DC, constant capacity)
Connection in parallel
Yes, for redundancy and increased capacity
Protection against overvoltage at the output (OVP)
≤ 32 V DC
Net weight
1.1 kg
Insulation voltage output / PE
500 V DC (routine test)
Nominal input voltage range
100 V AC ... 240 V AC
Inrush current
< 15 A
Nominal output voltage
24 V DC ±1 %
Feedback voltage resistance
≤ 35 V DC
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
MTBF (IEC 61709, SN 29500)
> 940000 h (25 °C)
Protection class
I
Conductor cross section flexible min.
0.2 mm²
Standard - Electrical safety
IEC 60950-1/VDE 0805 (SELV)
HART FSK Physical Layer Test Specification Compliance
Output voltage UOut compliant
Rail applications
EN 50121-4
Mains variation/undervoltage
SEMI F47-0706 Compliance Certificate
Contact discharge
8 kV (Test Level 4)
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Comments
Criterion A
Criterion A
Normal operating behavior within the specified limits.
I/O/S
asymmetrical
ECLASS 10.0.1
27040701
ETIM 4.0
EC000599
ETIM 6.0
EC002540
UNSPSC 18.0
39121004
UNSPSC 21.0
39121004
Discharge current to PE
< 3.5 mA
Mains buffering time
typ. 36 ms (120 V AC)
Nominal output current (IN)
10 A (-25 °C ... 60 °C, UOUT = 24 V DC)
Derating
60 °C ... 70 °C (2.5%/K)
Output power
240 W
Power loss nominal load max.
22 W
Insulation voltage input/output
4 kV AC (type test)
Conductor cross section AWG min.
16
Stripping length
7 mm
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Standard - Safe isolation
DIN VDE 0100-410
Standard – Limitation of mains harmonic currents
EN 61000-3-2
CSA
CAN/CSA-C22.2 No. 60950-1-07
Shipbuilding approval
DNV GL (EMC B), ABS, LR, RINA, NK, BV
Discharge in air
15 kV (Test Level 4)
Output
1 kV (Test Level 2 - symmetrical)
Conducted interference
EN 61000-4-6
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 11.0
27040701
ECLASS 5.0
27049000
UNSPSC 11
39121004
ETIM 7.0
EC002540
UNSPSC 19.0
39121004
Depth
125 mm
Degree of protection
IP20
AC frequency range
50 Hz ... 60 Hz
Residual ripple
< 50 mVPP (with nominal values)
Height
130 mm
Width with alternative assembly
122 mm
Ambient temperature (operation)
-40 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Installation height
≤ 5000 m
Depth with alternative assembly
63 mm
Degree of pollution
2
ECLASS 4.0
27040700
ECLASS 4.1
27040700
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Climatic class
3K3 (in acc. with EN 60721)
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Width
60 mm
Installation distance top/bottom
50 mm / 50 mm
Max. permissible relative humidity (operation)
100 % (at 25 °C, non-condensing)
Input voltage range
85 V AC ... 264 V AC
Conductor cross section solid max.
2.5 mm²
ECLASS 6.0
27049000