2902997 Phoenix Contact AC/DC Power Supplies

Product Details

• Height
  90 mm
• Ambient temperature (start-up type tested)
  -25 °C
• Input voltage range
  85 V AC ... 264 V AC
• Inrush current
  < 30 A (typical)
• Protective circuit/component
  Varistor
• Derating
  55 °C ... 70 °C (2.5%/K)
• Residual ripple
  < 75 mVPP (with nominal values)
• Power loss nominal load max.
  < 12 W
• Insulation voltage input/output
  4 kV AC (type test)
• Foot latch material
  POM (Polyoxymethylen)
• Conductor cross section flexible max.
  2.5 mm²
• Standard - Safety of transformers
  EN 61558-2-16
• Standard - Safe isolation
  DIN VDE 0100-410
• ETIM 4.0
  EC000599
• Width
  55 mm
• Degree of protection
  IP20
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K)
• Max. permissible relative humidity (operation)
  ≤ 95 % (at 25 °C, non-condensing)
• Nominal input voltage range
  100 V AC ... 240 V AC
• AC frequency range
  50 Hz ... 60 Hz -10 % ... +10 %
Input fuse
4 A (slow-blow, internal)
Type of protection
Transient surge protection
Feedback voltage resistance
< 25 V DC
Output power
100 W
Efficiency
typ. 88 % (120 V AC)
Assembly instructions
alignable: 0 mm horizontally, 30 mm vertically
Conductor cross section flexible min.
0.2 mm²
Stripping length
8 mm
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Fast transients (burst)
EN 61000-4-4
Test field strength
10 V/m
Voltage dips
EN 61000-4-11
ECLASS 4.0
27040700
Installation distance right/left
0 mm / 0 mm
Degree of pollution
2
Frequency range (fN)
50 Hz ... 60 Hz 10 %
Mains buffering time
> 20 ms (120 V AC)
Recommended breaker for input protection
6 A ... 16 A (Characteristics B, C, D, K)
Nominal output current (IN)
8.3 A (-25 °C ... 55 °C)
Connection in series
yes
Net weight
0.34 kg
MTBF (IEC 61709, SN 29500)
> 500000 h (40 °C)
Conductor cross section solid min.
0.2 mm²
Screw thread
M3
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
UL approvals
UL/C-UL listed UL 508
Discharge in air
8 kV (Test Level 3)
Voltage
10 V (Test Level 3)
ECLASS 10.0.1
27040701
ECLASS 6.0
27049000
ETIM 3.0
EC001039
UNSPSC 7.0901
39121004
UNSPSC 12.01
39121004
Depth
84 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Current consumption
2.19 A (100 V AC)
Power factor (cos phi)
0.53
Connection in parallel
Yes, for redundancy and increased capacity
Protection against overvoltage at the output (OVP)
≤ 25 V DC
Maximum power dissipation in no-load condition
< 0.4 W
Housing material
Polycarbonate
Connection method
Screw connection
Conductor cross section AWG min.
24
Standard - Electrical safety
IEC 62368-1/VDE 0805 (SELV)
EMC requirements for noise emission
EN 61000-6-3
Mains variation/undervoltage
EN 61000-4-11
Electrostatic discharge
EN 61000-4-2
Electromagnetic HF field
EN 61000-4-3
Output
1 kV (Test Level 2 - symmetrical)
Conducted interference
EN 61000-4-6
ECLASS 11.0
27040701
ECLASS 4.1
27040700
ETIM 7.0
EC002540
UNSPSC 18.0
39121004
Installation distance top/bottom
30 mm / 30 mm
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Climatic class
3K3 (in acc. with EN 60721)
Nominal power consumption
210.8 VA
Nominal output voltage
12 V DC ±1 %
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Typical response time
< 1 s
Protection class
II (in closed control cabinet)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section solid max.
2.5 mm²
Conductor cross section AWG max.
14
EMC requirements for noise immunity
EN 61000-6-1
Standard – Safety extra-low voltage
IEC 62368-1 (SELV) und EN 60204-1 (PELV)
CSA
CAN/CSA-C22.2 No. 60950-1-07
Contact discharge
6 kV (Test Level 3)
Comments
Criterion A
Input
2 kV (Test Level 3 - symmetrical)
Criterion A
Normal operating behavior within the specified limits.
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 5.1
27049000
ECLASS 9.0
27040701
UNSPSC 11
39121004
UNSPSC 21.0
39121004
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Frequency range
10 kHz ... 80 MHz
Surge voltage load (surge)
EN 61000-4-5
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 5.0
27049000
ECLASS 7.0
27049002
ETIM 6.0
EC002540
UNSPSC 19.0
39121004
UNSPSC 6.01
30211502
UNSPSC 13.2
39121004
UNSPSC 20.0
39121004