3044513 Phoenix Contact Terminal Blocks

Product Details

• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Short-time current
  0.48 kA
• Oscillation, broadband noise test result
  Test passed
• Conductor cross section short circuit testing
  4 mm²
• Tight fit on carrier
  NS 35
• Height
  46.9 mm
• Power frequency withstand voltage setpoint
  1.89 kV
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Conductor cross section solid max.
  4 mm²
• ECLASS 4.0
  27141100
• 2 conductors with same cross section, stranded min.
  0.14 mm²
• Internal cylindrical gage
  A3
• ECLASS 5.1
  27141100
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.14 mm²
• Tightening torque, min
  0.5 Nm
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  2.5 mm²
• ECLASS 10.0.1
  27141120
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.14 mm²
• ECLASS 11.0
  27141120
• Conductor cross section flexible min.
  0.14 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Screw thread
M3
Conductor cross section flexible max.
4 mm²
ETIM 6.0
EC000897
Shock test result
Test passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Number of shocks per direction
3
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ETIM 4.0
EC000901
Connection
1 level
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 3.0
EC000901
UNSPSC 20.0
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
UNSPSC 11
39121410
UNSPSC 21.0
39121410
ECLASS 7.0
27141120
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Number of levels
1
Insulating material
PA
Rated surge voltage
6 kV
Nominal current IN
24 A
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Test duration per axis
5 h
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Screw connection
Tightening torque max
0.6 Nm
Potentials
1
Insulating material group
I
Overvoltage category
III
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Shock duration
30 ms
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
End cover width
2.2 mm
Height NS 35/15
55 mm
Stripping length
9 mm
Conductor cross section solid min.
0.14 mm²
Result of surge voltage test
Test passed
Height NS 35/7,5
47.5 mm
Connection in acc. with standard
CSA
Flammability rating according to UL 94
V0
Area of application
Railway industry
Maximum load current
30 A (in case of a 4 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Nominal voltage UN
500 V
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Result of voltage-drop test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
1.857 (m/s2)2/Hz
Acceleration
5g
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
57.8 mm
Conductor cross section AWG min.
26
Conductor cross section AWG max.
12
2 conductors with same cross section, stranded max.
1.5 mm²
Nominal cross section
2.5 mm²
Color
gray
Open side panel
Yes
Back of the hand protection
guaranteed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Setpoint
1 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
5.2 mm
Number of connections
3
Degree of pollution
3
Maximum power dissipation for nominal condition
0.77 W
Min. AWG conductor cross section, flexible
26
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27141100
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Max. AWG conductor cross section, flexible
12
2 conductors with same cross section, solid min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141100
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
ETIM 2.0
EC000901
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410