3044089 Phoenix Contact Terminal Blocks

Product Details

• End cover width
  2.2 mm
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Connection method
  Screw connection
• Tensile test result
  Test passed
• Tightening torque, min
  0.5 Nm
• Conductor cross section solid max.
  4 mm²
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Conductor cross section solid min.
  0.14 mm²
• Conductor cross section flexible min.
  0.14 mm²
• Result of temperature-rise test
  Test passed
• Screw thread
  M3
• 2 conductors with same cross section, stranded max.
  1.5 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.14 mm²
• 2 conductors with same cross section, stranded min.
  0.14 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Test frequency
  f1 = 5 Hz to f2 = 150 Hz
• Connection in acc. with standard
  CSA
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.14 mm²
• 2 conductors with same cross section, solid min.
  0.14 mm²
Internal cylindrical gage
A3
Result of thermal test
Test passed
Tightening torque max
0.6 Nm
Conductor cross section flexible max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Number of levels
1
Insulating material group
I
Overvoltage category
III
Finger protection
guaranteed
Power frequency withstand voltage setpoint
2.2 kV
Tight fit on carrier
NS 35
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
ECLASS 10.0.1
27141120
ECLASS 5.1
27141100
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
Conductor cross section short circuit testing
4 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Maximum load current
32 A (with 4 mm² conductor cross section)
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Short-time current
0.48 kA
Test duration per axis
5 h
Test directions
X-, Y- and Z-axis (pos. and neg.)
Color
blue
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Short circuit stability result
Test passed
Acceleration
5g
Shock duration
30 ms
ECLASS 6.0
27141100
ECLASS 5.0
27141100
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Potentials
1
Insulating material
PA
Degree of pollution
3
Nominal voltage UN
1000 V
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Result of voltage-drop test
Test passed
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
1.857 (m/s2)2/Hz
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
5.2 mm
Length
47.7 mm
Ambient temperature (actuation)
-5 °C ... 70 °C
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Setpoint
1 N
ECLASS 4.0
27141100
ECLASS 11.0
27141120
ECLASS 7.0
27141120
ETIM 3.0
EC000897
UNSPSC 11
39121410
Open side panel
Yes
Maximum power dissipation for nominal condition
0.77 W
Conductor cross section AWG max.
12
UNSPSC 18.0
39121410
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
47.5 mm
Height NS 35/15
55 mm
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
46.9 mm
Stripping length
9 mm
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
26
Max. AWG conductor cross section, flexible
12
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ETIM 2.0
EC000897
ECLASS 9.0
27141120
ETIM 7.0
EC000897
Flammability rating according to UL 94
V0
Test spectrum
Service life test category 1, class B, body mounted
Rated surge voltage
8 kV
Nominal cross section
2.5 mm²
Area of application
Railway industry
Nominal current IN
24 A
Requirement temperature-rise test
Increase in temperature ≤ 45 K
UNSPSC 21.0
39121410
Number of connections
2
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
UNSPSC 19.0
39121410
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed