3044115 Phoenix Contact Terminal Blocks

Product Details

• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• ECLASS 6.0
  27141100
• UNSPSC 12.01
  39121410
• UNSPSC 19.0
  39121410
• Connection in acc. with standard
  CSA
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  2.5 mm²
• ECLASS 11.0
  27141120
• ETIM 4.0
  EC000897
• ETIM 6.0
  EC000897
• UNSPSC 13.2
  39121410
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• UNSPSC 20.0
  39121410
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
  1.5 mm²
• ECLASS 5.1
  27141100
• UNSPSC 11
  39121410
• UNSPSC 18.0
  39121410
• ECLASS 9.0
  27141120
• ETIM 3.0
  EC000897
• UNSPSC 21.0
  39121410
Potentials
1
Overvoltage category
III
Nominal voltage UN
1000 V
Finger protection
guaranteed
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
0.72 kA
Result of thermal test
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
ASD level
1.857 (m/s2)2/Hz
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
55 mm
Screw thread
M3
Insulating material
PA
Result of voltage-drop test
Test passed
Setpoint
1 N
Conductor cross section short circuit testing
6 mm²
Number of connections
2
Area of application
Railway industry
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test turns
135
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
Tightening torque max
0.8 Nm
Conductor cross section AWG max.
10
Max. AWG conductor cross section, flexible
10
2 conductors with same cross section, solid min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Shock form
Half-sine
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Number of levels
1
Color
blue
Rated surge voltage
8 kV
Degree of pollution
3
Open side panel
Yes
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
5g
Static insulating material application in cold
-60 °C
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Height
46.9 mm
Stripping length
9 mm
Conductor cross section solid max.
6 mm²
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Result of surge voltage test
Test passed
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Internal cylindrical gage
A4
Tensile test result
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Oscillation, broadband noise test result
Test passed
Shock test result
Test passed
Shock duration
30 ms
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
6.2 mm
Height NS 35/7,5
47.5 mm
Tightening torque, min
0.6 Nm
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
ECLASS 10.0.1
27141120
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
Power frequency withstand voltage setpoint
2.2 kV
Result of flexion and pull-out test
Test passed
Insulating material group
I
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Maximum load current
41 A (with 6 mm² conductor cross section)
Nominal current IN
32 A (with 4 mm² conductor cross section)
Back of the hand protection
guaranteed
Nominal cross section
4 mm²
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.02 W
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
ECLASS 7.0
27141120
2 conductors with same cross section, solid max.
1.5 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Length
47.7 mm
Conductor cross section flexible min.
0.14 mm²
ETIM 7.0
EC000897
UNSPSC 7.0901
39121410
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible max.
6 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27141100
Connection method
Screw connection