3044542 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Flammability rating according to UL 94
  V0
• Nominal voltage UN
  500 V
• Rated surge voltage
  6 kV
• Back of the hand protection
  guaranteed
• Potentials
  1
• Degree of pollution
  3
• Result of power-frequency withstand voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Number of connections
  4
• Area of application
  Railway industry
• Finger protection
  guaranteed
• Result of surge voltage test
  Test passed
• Bending test turns
  135
• Tight fit on carrier
  NS 35
• Setpoint
  1 N
• Short-time current
  0.48 kA
• Bending test rotation speed
  10 rpm
• ASD level
  1.857 (m/s2)2/Hz
• Shock form
  Half-sine
Shock test result
Test passed
ECLASS 5.1
27141100
Result of voltage-drop test
Test passed
Overvoltage category
III
Power frequency withstand voltage setpoint
1.89 kV
Result of temperature-rise test
Test passed
Number of levels
1
Insulating material
PA
Open side panel
Yes
Result of tight fit on support
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Nominal cross section
2.5 mm²
Nominal current IN
24 A
Insulating material group
I
Maximum load current
30 A (in case of a 4 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Acceleration
5g
Height NS 35/15
55 mm
Conductor cross section AWG max.
12
ECLASS 11.0
27141120
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Test duration per axis
5 h
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Shock duration
30 ms
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
5.2 mm
Stripping length
9 mm
Conductor cross section flexible min.
0.14 mm²
Maximum power dissipation for nominal condition
0.77 W
Tensile test result
Test passed
Result of thermal test
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test spectrum
Service life test category 1, class B, body mounted
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
47.5 mm
Screw thread
M3
Conductor cross section short circuit testing
4 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
46.9 mm
Tightening torque max
0.6 Nm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
Test directions
X-, Y- and Z-axis (pos. and neg.)
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
65.4 mm
Tightening torque, min
0.5 Nm
Min. AWG conductor cross section, flexible
26
Max. AWG conductor cross section, flexible
12
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ETIM 3.0
EC000901
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
End cover width
2.2 mm
Connection method
Screw connection
Connection in acc. with standard
CSA
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
26
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ETIM 6.0
EC000897
ETIM 7.0
EC000897
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Internal cylindrical gage
A3
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 2.0
EC000901
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
2 conductors with same cross section, solid min.
0.14 mm²
UNSPSC 6.01
30211811
2 conductors with same cross section, stranded max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.0
27141100
ECLASS 9.0
27141120
UNSPSC 12.01
39121410
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
UNSPSC 18.0
39121410