3248030 Phoenix Contact Terminal Blocks

Product Details

• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Conductor cross section solid max.
  4 mm²
• 2 conductors with same cross section, solid min.
  0.2 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  0.25 mm²
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• Tightening torque max
  0.6 Nm
• 2 conductors with same cross section, stranded max.
  1.5 mm²
• ETIM 3.0
  EC000897
• UNSPSC 12.01
  39121410
• UNSPSC 20.0
  39121410
• Screw thread
  M3
• Connection method
  Screw connection
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.25 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  2.5 mm²
• Length
  29.9 mm
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  2.5 mm²
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Connection in acc. with standard
  CSA
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
UNSPSC 6.01
30211811
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
ECLASS 11.0
27141120
ECLASS 4.0
27141100
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Degree of pollution
3
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of tight fit on support
Test passed
Result of thermal test
Test passed
Conductor cross section short circuit testing
4 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Number of positions
1
Color
gray
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Number of levels
1
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Number of connections
2
Overvoltage category
III
Maximum load current
32 A (with 4 mm² conductor cross section)
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Short-time current
0.48 kA
Oscillation, broadband noise test result
Test passed
Potentials
1
Insulating material
PA
Maximum power dissipation for nominal condition
0.77 W
Acceleration
30g
Shock form
Half-sine
Stripping length
9 mm
Open side panel
Yes
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of temperature-rise test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Requirements, voltage drop
≤ 3.2 mV
Proof of thermal characteristics (needle flame) effective duration
30 s
Insulating material group
I
Nominal current IN
24 A
Nominal cross section
2.5 mm²
Result of power-frequency withstand voltage test
Test passed
Rated surge voltage
6 kV
Flammability rating according to UL 94
V0
Nominal voltage UN
500 V
Finger protection
guaranteed
Surge voltage test setpoint
7.3 kV
Bending test turns
135
Tight fit on carrier
NS 15
Setpoint
1 N
Test spectrum
Service life test category 2, bogie-mounted
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Shock duration
18 ms
Number of shocks per direction
3
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Width
5.2 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG max.
12
Min. AWG conductor cross section, flexible
24
Max. AWG conductor cross section, flexible
12
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A3
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ECLASS 7.0
27141120
ECLASS 9.0
27141120
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 4.1
27141100
ECLASS 5.0
27141100
ETIM 4.0
EC001329
ETIM 7.0
EC000897
UNSPSC 21.0
39121410
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Height NS 15
34 mm
Tightening torque, min
0.5 Nm
Conductor cross section flexible min.
0.2 mm²
2 conductors with same cross section, solid max.
1.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
End cover width
2.2 mm
Conductor cross section flexible max.
4 mm²