3248125 Phoenix Contact Terminal Blocks

Product Details

• Connection cross sections directly pluggable
  0.34 mm² 4 mm²
• Test spectrum
  Service life test category 2, bogie-mounted
• Tensile test result
  Test passed
• Max. AWG conductor cross section, flexible
  14
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Acceleration
  30g
• UNSPSC 18.0
  39121410
• Nominal cross section
  2.5 mm²
• Flammability rating according to UL 94
  V0
• Rated surge voltage
  6 kV
• Maximum load current
  27 A (with 4 mm² conductor cross section)
• Result of power-frequency withstand voltage test
  Test passed
• UNSPSC 11
  39121410
• Nominal voltage UN
  500 V
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of flexion and pull-out test
  Test passed
• Setpoint
  1 N
• ETIM 7.0
  EC000897
• Number of connections
  2
• Insulating material
  PA
Degree of pollution
3
ECLASS 9.0
27141120
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Insulating material group
I
Power frequency withstand voltage setpoint
1.879 kV
Finger protection
guaranteed
Result of tight fit on support
Test passed
Short-time current
0.48 kA
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Potentials
1
Color
gray
Overvoltage category
III
Nominal current IN
24 A (with a 2.5 mm² conductor cross section)
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
ETIM 3.0
EC001329
ETIM 6.0
EC000897
UNSPSC 20.0
39121410
Back of the hand protection
guaranteed
Number of levels
1
Area of application
Railway industry
Maximum power dissipation for nominal condition
0.77 W
Open side panel
Yes
ETIM 4.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Result of surge voltage test
Test passed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
4 mm²
Min. AWG conductor cross section, flexible
26
Internal cylindrical gage
A3
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ECLASS 5.0
27141100
Result of aging test
Test passed
Shock test result
Test passed
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
End cover width
2.2 mm
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
26
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection
1 level
Conductor cross section solid max.
4 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 5.1
27141100
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of shocks per direction
3
Test duration per axis
5 h
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 7.0
27141120
Width
5.2 mm
Height
32.1 mm
Tight fit on carrier
NS 15
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ECLASS 4.1
27141100
Result of temperature-rise test
Test passed
ASD level
6.12 (m/s2)2/Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 15
34.8 mm
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Connection in acc. with standard
CSA
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Short circuit stability result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Surface flammability NFPA 130 (ASTM E 162)
passed
Length
36 mm
Connection method
Push-in connection
Conductor cross section flexible min.
0.14 mm²