3248032 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Insulating material
  PA
• Insulating material group
  I
• ECLASS 10.0.1
  27141141
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ETIM 3.0
  EC000897
• ETIM 4.0
  EC000901
• UNSPSC 18.0
  39121410
• Overvoltage category
  III
• Nominal cross section
  2.5 mm²
• Rated surge voltage
  6 kV
• Degree of pollution
  3
• Open side panel
  Yes
• Acceleration
  5g
• Shock test result
  Test passed
• Number of shocks per direction
  3
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Width
  5.2 mm
• Length
  29.9 mm
Stripping length
9 mm
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Screw thread
M3
Tightening torque max
0.6 Nm
ECLASS 5.1
27141100
ECLASS 9.0
27141141
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Color
green-yellow
Test spectrum
Service life test category 2, bogie-mounted
ASD level
6.12 (m/s2)2/Hz
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141141
ECLASS 5.0
27141100
ETIM 6.0
EC000901
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 7.0
EC000901
UNSPSC 19.0
39121410
Number of connections
2
Flammability rating according to UL 94
V0
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 7.0
27141141
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
30 ms
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Note
Please observe the current carrying capacity of the DIN rails.
Conductor cross section flexible min.
0.2 mm²
Max. AWG conductor cross section, flexible
12
Internal cylindrical gage
A3
Height NS 15
34 mm
Conductor cross section AWG min.
24
Connection in acc. with standard
CSA
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Tightening torque, min
0.5 Nm
Conductor cross section solid min.
0.2 mm²
Connection method
Screw connection
Conductor cross section AWG max.
12
Conductor cross section flexible max.
4 mm²
End cover width
2.2 mm
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²