3248035 Phoenix Contact Terminal Blocks

Product Details

• ECLASS 6.0
  27141100
• UNSPSC 6.01
  30211811
• UNSPSC 12.01
  39121410
• ECLASS 4.0
  27141100
• ETIM 7.0
  EC000897
• UNSPSC 18.0
  39121410
• ECLASS 10.0.1
  27141120
• UNSPSC 11
  39121410
• UNSPSC 13.2
  39121410
• ETIM 4.0
  EC001329
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Connection method
  Screw connection
• Conductor cross section solid max.
  6 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  4 mm²
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.25 mm²
• UNSPSC 21.0
  39121410
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
UNSPSC 20.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Stripping length
9 mm
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
Tightening torque max
0.8 Nm
Conductor cross section AWG max.
10
Conductor cross section flexible min.
0.2 mm²
Min. AWG conductor cross section, flexible
24
Permissible humidity (storage/transport)
30 % ... 70 %
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Nominal cross section
4 mm²
Insulating material group
I
Nominal voltage UN
500 V
Number of positions
1
Insulating material
PA
Rated surge voltage
6 kV
Back of the hand protection
guaranteed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
2 conductors with same cross section, stranded min.
0.2 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 4.1
27141100
ECLASS 9.0
27141120
Overvoltage category
III
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
6 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Shock test result
Test passed
Shock duration
18 ms
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
29.9 mm
Screw thread
M3
Connection in acc. with standard
CSA
Max. AWG conductor cross section, flexible
10
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27141100
ETIM 3.0
EC000897
Color
gray
Maximum load current
41 A (with 6 mm² conductor cross section)
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Tractive force setpoint
160 N
Tight fit on carrier
NS 15
Short circuit stability result
Test passed
Short-time current
0.72 kA
Test spectrum
Service life test category 1, class B, body mounted
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Power frequency withstand voltage setpoint
1.89 kV
Number of levels
1
Potentials
1
Flammability rating according to UL 94
V0
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Conductor cross section tensile test
6 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Internal cylindrical gage
A4
Ambient temperature (actuation)
-5 °C ... 70 °C
Nominal current IN
32 A (with 4 mm² conductor cross section)
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
30g
Shock form
Semi-sinusoidal
Static insulating material application in cold
-60 °C
Number of connections
2
Degree of pollution
3
Maximum power dissipation for nominal condition
1.02 W
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Tensile test result
Test passed
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Note
When aligning several blocks, it is recommended to either place a DIN rail adapter underneath the connection point or a flange element between the blocks.
Result of thermal test
Test passed
Width
6.2 mm
Surge voltage test setpoint
7.3 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Oscillation, broadband noise test result
Test passed
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.1
27141100
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 15
34 mm
Tightening torque, min
0.6 Nm
Conductor cross section AWG min.
24
Test directions
X-, Y- and Z-axis (pos. and neg.)
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz