Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

X20AI4632-1 B&R Electronic Components

B&R X20AI4632-1 X20 analog input module, 4 inputs, ±11 V or 0 to 22 mA, 16-bit converter resolution, configurable input filter, oscilloscope functions
B&R

Part#:X20AI4632-1

Manufacturer:B&R

Product Lifecycle:Active

In-stock parts: 11

Dec 23, 2024

X20 analog input module, 4 inputs, ±11 V or 0 to 22 mA, 16-bit converter resolution, configurable input filter, oscilloscope functions

Check out the X20AI4632-1 B&R price in the box on the right side or send a quick quote.

Product Details

  • Temperature Operation Horizontal mounting orientation
    -25 to 60°C
  • Temperature Operation Vertical mounting orientation
    -25 to 50°C
  • Max. error Current Offset
    0.02%
  • Max. error Current Gain
    0.08%
  • Output of digital value during overload Overshoot Current
    0x7FFF
  • Max. error Voltage Offset
    0.01%
  • Max. error Voltage Gain
    0.08%
  • Output of digital value during overload Overshoot Voltage
    0x7FFF
  • Output of digital value during overload Undershoot Voltage
    0x8001
  • Output of digital value during overload Undershoot Current
    0x0000
  • Relative humidity Transport
    5 to 95%, non-condensing
  • Temperature Transport
    -40 to 85°C
  • Relative humidity Storage
    5 to 95%, non-condensing
  • Relative humidity Operation
    5 to 95%, non-condensing
  • Installation elevation above sea level 0 to 2000 m
    No limitation
  • Temperature Storage
    -40 to 85°C
  • Temperature Derating
    See section "Derating".
  • Installation elevation above sea level >2000 m
    Reduction of ambient temperature by 0.5°C per 100 m
  • Mounting orientation Vertical
    Yes
  • Mounting orientation Horizontal
    Yes
  • Nonlinearity Current
    <0.015%
  • Nonlinearity Voltage
    <0.01%
  • Common-mode rejection 50 Hz
    70 dB
  • Common-mode rejection DC
    70 dB
  • Max. offset drift Current
    0.002%/°C
  • Max. offset drift Voltage
    0.001%/°C
  • Max. gain drift Voltage
    0.01%/°C
  • Permissible input signal Current
    Max. ±50 mA
  • Max. gain drift Current
    0.01%/°C
  • Permissible input signal Voltage
    Max. ±30 V
  • Load Voltage
    -
  • Load Current
    <400 Ω
  • Input impedance in signal range Current
    -
  • Input impedance in signal range Voltage
    20 MΩ
  • Output format Current
    INT 0x0000 - 0x7FFF / 1 LSB = 0x0001 = 671.387 nA
  • Digital converter resolution Current
    15-bit
  • Output format Voltage
    INT 0x8001 - 0x7FFF / 1 LSB = 0x0001 = 335.693 µV
  • Conversion time
    50 μs for all inputs
  • Conversion procedure
    SAR
  • Certifications LR
    ENV1
  • Digital converter resolution Voltage
    ±15-bit
  • Certifications KC
    Yes
  • Certifications EAC
    Yes
  • Certifications KR
    Yes
  • Certifications ABS
    Yes
  • Certifications HazLoc
    cCSAus 244665; Process control equipment; for hazardous locations; Class I, Division 2, Groups ABCD, T5
  • Certifications ATEX
    Zone 2, II 3G Ex nA nC IIA T5 Gc; IP20, Ta (see X20 user's manual); FTZÚ 09 ATEX 0083X
  • Certifications DNV
    Temperature: B (0 - 55°C); Humidity: B (up to 100%); Vibration: B (4 g); EMC: B (bridge and open deck)
  • Certifications UL
    cULus E115267; Industrial control equipment
  • Certifications UKCA
    Yes
  • Input type
    Differential input
  • Certifications CE
    Yes
  • Power consumption Internal I/O
    1.5 W
  • Input protection
    Protection against wiring with supply voltage
  • Output format
    INT
  • Status indicators
    I/O function per channel, operating state, module status
  • I/O module
    4 analog inputs ±11 V or 0 to 22 mA
  • B&R ID code
    0xA29D
  • Input
    ±11 V or 0 to 22 mA, via different terminal connections
  • Power consumption Bus
    0.01 W
  • Diagnostics Inputs
    Yes, using LED status indicator and software
  • Diagnostics Channel type
    Yes, using software
  • Diagnostics Module run/error
    Yes, using LED status indicator and software
  • Pitch
    12.5+0.2 mm
  • Note
    Order 1x terminal block X20TB12 separately.; Order 1x bus module X20BM11 separately.
  • Degree of protection per EN 60529
    IP20
  • Electrical isolation
    Channel isolated from bus; Channel not isolated from channel
  • Common-mode range
    ±12 V
  • Insulation voltage between channel and bus
    500 Veff
  • Crosstalk between channels
    <-70 dB
  • Input filter
    Hardware - Third-order low-pass filter / cutoff frequency 10 kHz

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging



1-year warranty

Get a quick Quote!

Request a quote, and we will send you price within minutes.

Stock:

11

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of B&R

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

B&R Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many B&R Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from B&R, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo