X20AP3131 B&R Electronic Components

Product Details

• Temperature Operation Horizontal mounting orientation
  -25 to 60°C
• Temperature Operation Vertical mounting orientation
  -25 to 50°C
• Relative humidity Transport
  5 to 95%, non-condensing
• Relative humidity Storage
  5 to 95%, non-condensing
• Temperature Transport
  -40 to 85°C
• Temperature Storage
  -40 to 85°C
• Relative humidity Operation
  5 to 95%, non-condensing
• Temperature Derating
  See section "Derating".
• Installation elevation above sea level 0 to 2000 m
  No limitation
• Installation elevation above sea level >2000 m
  Not permitted
• Mounting orientation Vertical
  Yes
• Mounting orientation Horizontal
  Yes
• Apparent energy Per phase and arithmetic total
  ±1.50% (Rev.
• Apparent energy Vector sum
  ±1.80% (Rev.
• Nominal current IN Secondary
  5 A
• Nominal current IN Primary
  65 A directly configurable, larger values through conversion in the application
• Measurable frequency Measurement range
  45 to 65 Hz
• Measurable frequency Resolution
  0.01 Hz
• Nominal voltage UN Phase to N
  Max. 277 VAC
• Certifications EAC
  Yes
Nominal voltage UN Between phases
Max. 480 VAC
Certifications ABS
Yes
Certifications KR
Yes
Certifications LR
ENV1
Certifications DNV
Temperature: B (0 - 55°C); Humidity: B (up to 100%); Vibration: B (4 g); EMC: B (bridge and open deck)
Certifications HazLoc
cCSAus 244665; Process control equipment; for hazardous locations; Class I, Division 2, Groups ABCD, T5
Certifications ATEX
Zone 2, II 3G Ex nA nC IIA T5 Gc; IP20, Ta (see X20 user's manual); FTZÚ 09 ATEX 0083X
Certifications UKCA
Yes
Certifications UL
cULus E115267; Industrial control equipment
Certifications CE
Yes
Insulation voltages Bus / I/O power supply - Ground
Tested at 510 VAC, 1 min
Insulation voltages Inputs - Ground
Tested at 5500 VDC, 1 min
Insulation voltages Inputs - Bus / I/O power supply
Tested at 5500 VDC, 1 min
Power consumption Internal I/O
-
Power consumption Bus
0.85 W (Rev. E0)
Diagnostics Inputs
Yes, using LED status indicator and software
Diagnostics Module run/error
Yes, using LED status indicator and software
Pitch
25+0.2 mm
Note
Order 1x terminal block X20TB32 separately. ; Order 1x bus module X20BM32 separately.
Degree of protection per EN 60529
IP20
Active energy of fundamental frequency per phase and total
±1.50% (Rev.
Electrical isolation
Channel isolated from bus; Channel not isolated from channel
Active energy of harmonics per phase and total
±1.80% (Rev.
Reactive energy per phase and total
±1.50% (Rev.
Frequency, power factor and phase angle
±0.50%
Active energy per phase and total
±1.40% (Rev.
URMS
±0.65%
Effective, reactive and apparent power
±1.80% (Rev.
Load
20 mΩ
Max. measurement current
5 A
IRMS
±1.65% (Rev.
I/O module
3-phase power and energy metering module for current transformers
Max. overload current
8 x IN for 0.5 s
Quantity
4 AC inputs
Resolution
10 mV, with voltage connected directly
Max. display value
655 VAC
Input impedance
1.68 MΩ
B&R ID code
0xC9DC
Additional module power dissipation [W]
2 W
Rated frequency
50 and 60 Hz
Number of phases
3
Status indicators
I/O function per channel, operating state, module status

Related documents X20AP3131 Specs