X20DI4371 B&R Electronic Components

Product Details

• Temperature Operation Vertical mounting orientation
  -25 to 50°C
• Temperature Operation Horizontal mounting orientation
  -25 to 60°C
• Relative humidity Transport
  5 to 95%, non-condensing
• Relative humidity Operation
  5 to 95%, non-condensing
• Relative humidity Storage
  5 to 95%, non-condensing
• Temperature Storage
  -40 to 85°C
• Temperature Transport
  -40 to 85°C
• Installation elevation above sea level >2000 m
  Reduction of ambient temperature by 0.5°C per 100 m
• Switching threshold High
  >15 VDC
• Installation elevation above sea level 0 to 2000 m
  No limitation
• Temperature Derating
  -
• Mounting orientation Horizontal
  Yes
• Mounting orientation Vertical
  Yes
• Input filter Software
  Default 1 ms, configurable between 0 and 25 ms in 0.2 ms increments
• Switching threshold Low
  <5 VDC
• Certifications KC
  Yes
• Input filter Hardware
  ≤100 μs
• Certifications EAC
  Yes
• Certifications DNV
  Temperature: B (0 - 55°C); Humidity: B (up to 100%); Vibration: B (4 g); EMC: B (bridge and open deck)
• Certifications KR
  Yes
Certifications ABS
Yes
Certifications LR
ENV1
Input characteristics per EN 61131-2
Type 1
Certifications UL
cULus E115267; Industrial control equipment
Certifications CE
Yes
Certifications ATEX
Zone 2, II 3G Ex nA nC IIA T5 Gc; IP20, Ta (see X20 user's manual); FTZÚ 09 ATEX 0083X
Power consumption Internal I/O
0.59 W
Certifications HazLoc
cCSAus 244665; Process control equipment; for hazardous locations; Class I, Division 2, Groups ABCD, T5
Power consumption Bus
0.14 W
Certifications UKCA
Yes
Diagnostics Module run/error
Yes, using LED status indicator and software
Nominal voltage
24 VDC
Status indicators
I/O function per channel, operating state, module status
Note
Order 1x terminal block X20TB12 separately.; Order 1x bus module X20BM11 separately.
Connection type
3-wire connections
Input circuit
Sink
Pitch
12.5+0.2 mm
Electrical isolation
Channel isolated from bus; Channel not isolated from channel
Degree of protection per EN 60529
IP20
Input voltage
24 VDC -15% / +20%
Summation current
0.5 A
Input current at 24 VDC
Typ. 3.75 mA
Short-circuit proof
Yes
Voltage drop for short-circuit protection at 500 mA
Max. 2 VDC
Voltage
Module power supply minus voltage drop for short-circuit protection
Power consumption
Max. 12 W
Counter size
16-bit
Counter frequency
Max. 1 kHz (if input filter switched off)
Counter 4
Input 4
I/O module
4 digital inputs 24 VDC for 3-wire connections
B&R ID code
0x1B92
Counter 3
Input 3
Counter 2
Input 2
Counter 1
Input 1
Input frequency
Max. 1 kHz
Evaluation
Configurable edge event, cyclical counter
Signal form
Square wave pulse
Quantity
4
Insulation voltage between channel and bus
500 Veff
Input resistance
Typ. 6.4 kΩ

Related documents X20DI4371 Specs