X20DI4760 B&R Electronic Components

Product Details

• Temperature Operation Horizontal mounting orientation
  -25 to 60°C
• Temperature Operation Vertical mounting orientation
  -25 to 50°C
• Relative humidity Storage
  5 to 95%, non-condensing
• Relative humidity Transport
  5 to 95%, non-condensing
• Relative humidity Operation
  5 to 95%, non-condensing
• Temperature Storage
  -40 to 85°C
• Temperature Transport
  -40 to 85°C
• Installation elevation above sea level >2000 m
  Reduction of ambient temperature by 0.5°C per 100 m
• Temperature Derating
  See section "Derating".
• Installation elevation above sea level 0 to 2000 m
  No limitation
• Mounting orientation Vertical
  Yes
• Mounting orientation Horizontal
  Yes
• Switching threshold Switching hysteresis
  Typ. 300 µA
• Switching threshold Area
  1.2 mA to 2.1 mA
• Input delay 4 inputs active
  ≤735 µs
• Input delay 3 inputs active
  ≤570 µs
• Input delay 2 inputs active
  ≤450 µs
• Input delay 1 input active
  ≤310 µs
• Input frequency 3 inputs active
  Max. 870 Hz
• Input frequency 4 inputs active
  Max. 680 Hz
Input frequency 2 inputs active
Max. 1100 Hz
Certifications KC
Yes
Input frequency 1 input active
Max. 1600 Hz
Certifications EAC
Yes
Certifications KR
Yes
Certifications LR
ENV1
Certifications ABS
Yes
Certifications DNV
Temperature: B (0 - 55°C); Humidity: B (up to 100%); Vibration: B (4 g); EMC: B (bridge and open deck)
Certifications UL
cULus E115267; Industrial control equipment
Certifications CE
Yes
Certifications ATEX
Zone 2, II 3G Ex nA nC IIA T5 Gc; IP20, Ta (see X20 user's manual); FTZÚ 09 ATEX 0083X
Certifications HazLoc
cCSAus 244665; Process control equipment; for hazardous locations; Class I, Division 2, Groups ABCD, T5
Power consumption Bus
0.01 W
Power consumption Internal I/O
1.5 W
Certifications UKCA
Yes
Diagnostics Short circuit
Yes, using LED status indicator and software
Diagnostics Open circuit
Yes, using LED status indicator and software
Diagnostics Module run/error
Yes, using LED status indicator and software
Note
Order 1x terminal block X20TB12 separately. ; Order 1x bus module X20BM11 separately.
Switching amplifier internal resistance
1 kΩ ±1%
Degree of protection per EN 60529
IP20
Pitch
12.5+0.2 mm
Open-circuit voltage
8.05 V ±0.33%
Electrical isolation
Channel isolated from bus; Channel not isolated from channel
Short-circuit detection
>7 mA
Max. short-circuit current
8.2 mA
Insulation voltage between channel and bus
500 Veff
B&R ID code
0x2105
Open-circuit detection
<350 µA
Input circuit
For NAMUR encoder per EN 60947-5-6
Quantity
4
Signal form
Symmetrical square waves or corresponding minimum pulse duration
I/O module
4 NAMUR inputs, special function
Evaluation
Each positive edge, cyclic counter
Status indicators
I/O function per channel, open-circuit and short-circuit detection per channel, operating state, module status
Counter size
8-bit

Related documents X20DI4760 Specs