X20DO4322 B&R Electronic Components

Product Details

• Temperature Operation Vertical mounting orientation
  -25 to 50°C
• Temperature Operation Horizontal mounting orientation
  -25 to 60°C
• Relative humidity Transport
  5 to 95%, non-condensing
• Relative humidity Storage
  5 to 95%, non-condensing
• Relative humidity Operation
  5 to 95%, non-condensing
• Temperature Transport
  -40 to 85°C
• Temperature Storage
  -40 to 85°C
• Installation elevation above sea level >2000 m
  Reduction of ambient temperature by 0.5°C per 100 m
• Temperature Derating
  -
• Mounting orientation Vertical
  Yes
• Installation elevation above sea level 0 to 2000 m
  No limitation
• Mounting orientation Horizontal
  Yes
• Power consumption Actuator power supply
  Max. 12 W
• Switching frequency Inductive load
  See section "Switching inductive loads".
• Switching delay 1 → 0
  <300 µs
• Switching frequency Resistive load
  Max. 500 Hz
• Switching delay 0 → 1
  <300 µs
• Certifications EAC
  Yes
• Certifications KC
  Yes
• Certifications ABS
  Yes
Certifications KR
Yes
Certifications DNV
Temperature: B (0 - 55°C); Humidity: B (up to 100%); Vibration: B (4 g); EMC: B (bridge and open deck)
Certifications LR
ENV1
Certifications HazLoc
cCSAus 244665; Process control equipment; for hazardous locations; Class I, Division 2, Groups ABCD, T5
Certifications UKCA
Yes
Certifications ATEX
Zone 2, II 3G Ex nA nC IIA T5 Gc; IP20, Ta (see X20 user's manual); FTZÚ 09 ATEX 0083X
Certifications UL
cULus E115267; Industrial control equipment
Certifications CE
Yes
Power consumption Internal I/O
0.49 W
Diagnostics Outputs
Yes, using LED status indicator and software (output error status)
Pitch
12.5+0.2 mm
Diagnostics Module run/error
Yes, using LED status indicator and software
Note
Order 1x terminal block X20TB12 separately.; Order 1x bus module X20BM11 separately.
Power consumption Bus
0.16 W
Degree of protection per EN 60529
IP20
Braking voltage when switching off inductive loads
Typ. 50 VDC
Voltage
Module power supply minus voltage drop for short-circuit protection
Insulation voltage between channel and bus
500 Veff
Short-circuit proof
Yes
Electrical isolation
Channel isolated from bus; Channel not isolated from channel and I/O power supply
Peak short-circuit current
<12 A
Switch-on in the event of overload shutdown or short-circuit shutdown
Approx. 10 ms (depends on the module temperature)
Voltage drop for short-circuit protection at 500 mA
Max. 2 V
RDS(on)
210 mΩ
Leakage current when the output is switched off
5 µA
Nominal voltage
24 VDC
Nominal output current
0.5 A
Diagnostic status
Output monitoring with 10 ms delay
Switching voltage
24 VDC -15% / +20%
Variant
Current-sourcing FET
Total nominal current
2 A
Additional power dissipation caused by actuators (resistive) [W]
+0.21
Actuator power supply
0.5 A in total for output-independent actuator power supply
Status indicators
I/O function per channel, operating state, module status
B&R ID code
0x1B97
I/O module
4 digital outputs 24 VDC for 3-wire connections
Output protection
Thermal shutdown in the event of overcurrent or short circuit (see value "Short-circuit peak current"); Internal freewheeling diode for switching inductive loads (see section "Switching inductive loads")
Connection type
3-wire connections
Output circuit
Source

Related documents X20DO4322 Specs