1046972 Phoenix Contact Terminal Blocks

Product Details

• ETIM 6.0
  EC000897
• Shock duration
  18 ms
• Number of connections
  13
• Color
  white
• Insulating material
  PA
• Maximum load current
  22 A (with a 2.5 mm² conductor cross section)
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock form
  Half-sine
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Height
  17.7 mm
• Conductor cross section AWG min.
  26
• Stripping length
  8 mm ... 10 mm
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.14 mm²
• Max. AWG conductor cross section, flexible
  14
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• ECLASS 10.0.1
  27141120
• Nominal cross section
  1.5 mm²
• Degree of pollution
  3
Insulating material group
I
Nominal voltage UN
450 V
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection
Pick-off level
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible max.
1.5 mm²
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
Nominal cross section feed-in
4 mm²
Rated surge voltage
6 kV
Nominal current IN
17.5 A
Open side panel
No
Acceleration
30g
Shock test result
Test passed
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible min.
0.14 mm²
Min. AWG conductor cross section, flexible
26
Connection cross sections directly pluggable
0.34 mm² 2.5 mm²
Value
0.34 mm²
ECLASS 11.0
27141120
ETIM 7.0
EC000897
Number of levels
1
Flammability rating according to UL 94
V0
Overvoltage category
III
Maximum total current
32 A
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
31.4 mm
Length
21.6 mm
Connection method
Push-in connection
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Internal cylindrical gage
A3
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 9.0
27141120