3044144 Phoenix Contact Terminal Blocks

Product Details

• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• 2 conductors with same cross section, solid min.
  0.2 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
  1.5 mm²
• ECLASS 7.0
  27141120
• ETIM 4.0
  EC000897
• UNSPSC 21.0
  39121410
• Shock test result
  Test passed
• 2 conductors with same cross section, stranded max.
  2.5 mm²
• Internal cylindrical gage
  A5
• ECLASS 4.1
  27141100
• ETIM 2.0
  EC000897
• ETIM 3.0
  EC000897
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Conductor cross section flexible max.
  10 mm²
• Height
  46.9 mm
• Number of shocks per direction
  3
• Static insulating material application in cold
  -60 °C
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.25 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.25 mm²
• China RoHS
  Environmentally Friendly Use Period = 50 years
UNSPSC 11
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section flexible min.
0.2 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
UNSPSC 18.0
39121410
Tightening torque, min
1.5 Nm
Conductor cross section AWG min.
24
Permissible humidity (storage/transport)
30 % ... 70 %
UNSPSC 20.0
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
ECLASS 5.0
27141100
UNSPSC 19.0
39121410
Result of surge voltage test
Test passed
Maximum load current
57 A (with 10 mm² conductor cross section)
Overvoltage category
III
Bending test rotation speed
10 rpm
Tensile test result
Test passed
Conductor cross section short circuit testing
10 mm²
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of temperature-rise test
Test passed
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Nominal current IN
41 A
Back of the hand protection
guaranteed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Bending test turns
135
Setpoint
5 N
Tight fit on carrier
NS 35
Short-time current
1.2 kA
Test spectrum
Service life test category 1, class B, body mounted
Shock duration
30 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
End cover width
2.2 mm
Rated surge voltage
8 kV
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Width
8.2 mm
Connection method
Screw connection
Connection in acc. with standard
CSA
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Min. AWG conductor cross section, flexible
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ECLASS 4.0
27141100
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
Power frequency withstand voltage setpoint
2.2 kV
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
ASD level
1.857 (m/s2)2/Hz
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/15
55 mm
Stripping length
10 mm
Height NS 35/7,5
47.5 mm
Conductor cross section solid max.
10 mm²
Conductor cross section solid min.
0.2 mm²
Number of connections
2
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.31 W
Result of flexion and pull-out test
Test passed
Number of levels
1
Insulating material
PA
Degree of pollution
3
Open side panel
Yes
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
5g
Length
47.7 mm
Screw thread
M4
Tightening torque max
1.8 Nm
Conductor cross section AWG max.
8
Max. AWG conductor cross section, flexible
8
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
2 conductors with same cross section, solid max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
Nominal cross section
6 mm²
Result of power-frequency withstand voltage test
Test passed
Area of application
Railway industry
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Color
blue
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Potentials
1
Insulating material group
I
Nominal voltage UN
1000 V
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C