3044720 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Insulating material group
  I
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Back of the hand protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tensile test result
  Test passed
• Setpoint
  1 N
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock test result
  Test passed
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Note
  Current and voltage are determined by the plug used.
• Number of connections
  4
• Overvoltage category
  III
• Result of surge voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Bending test rotation speed
  10 rpm
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Short-time current
  0.72 kA
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Acceleration
  5g
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
69.9 mm
Screw thread
M3
Tightening torque max
0.8 Nm
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
26
2 conductors with same cross section, stranded min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 10.0.1
27141126
ECLASS 4.1
27141100
ECLASS 6.0
27141100
ETIM 3.0
EC000901
UNSPSC 7.0901
39121410
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
Nominal cross section
4 mm²
Flammability rating according to UL 94
V0
Degree of pollution
3
Nominal voltage UN
500 V
Finger protection
guaranteed
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 1, class B, body mounted
Test duration per axis
5 h
Shock duration
30 ms
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
6.2 mm
Height NS 35/7,5
65 mm
Tightening torque, min
0.6 Nm
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Internal cylindrical gage
A4
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 9.0
27141126
ECLASS 5.1
27141100
ETIM 2.0
EC000901
ETIM 6.0
EC000902
UNSPSC 11
39121410
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Number of levels
2
Insulating material
PA
Rated surge voltage
6 kV
Maximum load current
20 A (with 6 mm² conductor cross section)
Nominal current IN
20 A
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
6 mm²
ASD level
0.02 g²/Hz
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
72.5 mm
Connection in acc. with standard
CSA
Conductor cross section solid max.
6 mm²
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ECLASS 7.0
27141126
ECLASS 5.0
27141100
ETIM 4.0
EC000901
ETIM 7.0
EC000902
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
Color
gray
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Open side panel
Yes
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height
64.4 mm
Connection method
Screw connection
Stripping length
9 mm
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Max. AWG conductor cross section, flexible
10
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm