3044226 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Insulating material
  PA
• Maximum power dissipation for nominal condition
  4.06 W
• Nominal current IN
  125 A
• Bending test rotation speed
  10 rpm
• Tensile test result
  Test passed
• Short circuit stability result
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test duration per axis
  5 h
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Length
  61.2 mm
• Screw thread
  M6
• Conductor cross section solid min.
  1.5 mm²
• Conductor cross section AWG min.
  16
• Conductor cross section AWG max.
  1/0
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  1.5 mm²
• 2 conductors with same cross section, stranded min.
  1.5 mm²
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ECLASS 6.0
27141100
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Number of connections
2
Flammability rating according to UL 94
V0
Insulating material group
I
Open side panel
No
Power frequency withstand voltage setpoint
2.2 kV
Bending test conductor cross section/weight
1.5 mm² / 0.4 kg
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
50 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height NS 35/7,5
65.7 mm
Height
65.1 mm
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
Conductor cross section flexible max.
50 mm²
2 conductors with same cross section, solid max.
16 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
UNSPSC 6.01
30211811
Potentials
1
Degree of pollution
3
Maximum load current
150 A (with 50 mm² conductor cross section)
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Setpoint
10 N
Test spectrum
Service life test category 1, class B, body mounted
ASD level
1.857 (m/s2)2/Hz
Shock test result
Test passed
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Screw connection
Tightening torque max
3.7 Nm
Conductor cross section solid max.
50 mm²
Max. AWG conductor cross section, flexible
1
Conductor cross section flexible, with ferrule with plastic sleeve max.
35 mm²
2 conductors with same cross section, stranded max.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
16 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ETIM 7.0
EC000897
UNSPSC 11
39121410
Nominal cross section
35 mm²
Overvoltage category
III
Nominal voltage UN
1000 V
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Acceleration
5g
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
16 mm
Stripping length
18 mm
Conductor cross section flexible min.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
35 mm²
Internal cylindrical gage
B9
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
Color
black
Rated surge voltage
8 kV
Result of power-frequency withstand voltage test
Test passed
Result of surge voltage test
Test passed
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
6 kA
Shock duration
30 ms
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Height NS 35/15
73.2 mm
Tightening torque, min
3.2 Nm
Connection in acc. with standard
IEC 60947-7-1
Min. AWG conductor cross section, flexible
16
Conductor cross section flexible, with ferrule with plastic sleeve min.
1.5 mm²
2 conductors with same cross section, solid min.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
10 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 3.0
EC000897
ECLASS 9.0
27141120
ETIM 4.0
EC000897
UNSPSC 19.0
39121410
UNSPSC 18.0
39121410
UNSPSC 7.0901
39121410
ETIM 6.0
EC000897
ECLASS 7.0
27141120
UNSPSC 20.0
39121410
UNSPSC 12.01
39121410